“Epoxy Polish” – Epoxy Resin Polishing System

Instruction Manual: Mirca Abralon Pads + Polishing Cream Kit

Safety Precautions

• Wear protective gloves to avoid skin irritation.
• Use safety glasses and a dust mask when sanding.
• Work in a well-ventilated area.

Step-by-Step Polishing Guide

Step 1: Preparation

1. Clean the Surface:
   • Ensure the resin surface is free from dust, debris, and grease.
   • Use a soft cloth or isopropyl alcohol for cleaning.
2. Inspect the Surface:
   • Check for scratches, irregularities, or cloudy areas that need polishing.

Step 2: Sanding

Important: Always keep the pads and surface slightly damp during sanding to reduce heat and prevent dust.

1. Start with the 500 Grit Pad:
   • Gently sand the surface in a circular motion or back-and-forth.
   • Apply light pressure; let the pad do the work.
   • Wipe off the residue with a damp cloth.
2. Repeat with Finer Grits (1000, 2000, and 4000):
   • Move to the next grit only after the surface feels smoother.
   • Continue sanding progressively to refine the finish.

Step 3: Polishing

1. Apply the Polishing Cream:
   • Place a small amount of ResinPro Polishing Cream onto a microfiber cloth or a buffing wheel.
   • Spread it evenly over the surface.
2. Polish the Surface:
   • Use a circular motion to buff the surface.
   • If using a buffing wheel, keep the speed low to medium.
   • Continue until the surface becomes glossy and smooth.
3. Wipe Off Excess Cream:
   • Use a clean, dry microfiber cloth to remove residue.

Step 4: Finishing

1. Inspect the surface under good lighting to ensure a uniform finish.
2. If necessary, repeat the polishing step for extra gloss.

Tips for Best Results

• Keep the pads damp but not soaking wet.
• Sand evenly without skipping grit levels for a smooth transition.
• Avoid over-polishing to prevent overheating or damage to the surface.

Care and Maintenance

• Wash the Abralon pads after use with water and mild soap. Allow them to air dry.
• Seal the polishing cream tightly to prevent it from drying out.

FAQs
“EPOXY POLISH” – Resin Polishing Kit – Cream & Pads:

Q: Can I use this kit on other materials like wood or metal?
A: Yes, the Mirca Abralon pads and polishing cream work well on various surfaces but are optimized for resin.

Q: How often should I change the pads?
A: Replace them when they show signs of wear or lose effectiveness.