Moisture Control for Resin Flowers

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Moisture Control for Resin Flowers

Controlling moisture in resin flowers is essential to preserve their quality and appearance. To prevent moisture from compromising the resin, it is advisable to use airtight containers with a humidity indicator. Additionally, it is important to store resin flowers in a cool, dry environment, away from heat sources and direct light. A common option is to use silica gel packets to absorb excess moisture. Make sure to regularly check the humidity levels and make necessary adjustments to ensure optimal preservation of resin flowers.

How to prevent bubbles in resin flowers

To avoid bubbles in resin for flowers, carefully follow these steps:

1. Make sure the flowers are dry and free from moisture.
2. Use a specific resin for flowers or a transparent resin with high viscosity.
3. Pour the resin slowly over the elements without stirring it too much.
4. Eliminate air bubbles with a gas torch or a heat gun.
5. Let it rest in a draft-free environment to allow the bubbles to rise to the surface and disappear.
6. Cover the work with a container to protect it from dust and dirt during curing. By following these tips, you can achieve bubble-free results in resin for flowers.

Transparent resin flower techniques

There are multiple techniques for creating flowers with transparent resin that allow you to achieve creative and decorative results. Here are some common steps for creating flowers with transparent resin:

• Prepare the materials: transparent resin and hardeners, colored pigments if desired, flower molds.
• Pour the resin into the molds: accurately measure the resin and pour it into the molds, being careful to eliminate any air bubbles.
• Insert the flowers: place dried or preserved flowers in the resin, allowing them to float or arranging them creatively.
• Curing: let the resin dry and cure following the recommended drying times.
• Finishing: once cured, you can polish the surface and optionally apply additional layers of resin to protect and enhance the flowers. These techniques offer the opportunity to create stunning decorations with flowers immersed in transparent resin.

Shiny Resin Flower Tips

To achieve shiny and durable flowers, we recommend using high-quality transparent epoxy resin to coat them. Here are some steps to follow for an optimal result:

1. Prepare the flowers: Make sure they are completely dry and free from moisture.
2. Pour the resin: Thoroughly mix the epoxy resin following the manufacturer's instructions.
3. Apply the resin: Pour the resin over the flowers in a uniform layer, ensuring they are fully covered.
4. Remove air bubbles: Use a torch or syringe to eliminate air bubbles trapped in the resin.
5. Let it dry: Follow the recommended drying times before handling the flowers. By following these tips, you will achieve shiny flowers protected by epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85