Dissolving adhesive on stainless steel

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Dissolving adhesive on stainless steel

To dissolve adhesive on stainless steel, it is advisable to use specific solvents such as acetone or isopropyl alcohol. These products are effective in removing adhesive residues without damaging the surface of the stainless steel. Before proceeding, make sure to test the solvent on a small hidden area to check compatibility with the material. Apply the solvent on the surface with a soft cloth or sponge, let it sit for a few minutes, and then gently rub to remove the softened adhesive. Repeat the process if necessary until all the adhesive is completely removed. Finally, clean the surface thoroughly with water and mild soap.

Epoxy resin on stainless steel

Epoxy resin on stainless steel is a versatile and durable solution for protecting and decorating metal surfaces. This type of coating offers numerous advantages, including:

• Resistance to corrosion and weathering
• High hardness and wear resistance
• Easy cleaning and maintenance
• Wide range of colors and finishes available Before application, it is essential to properly prepare the surface of the stainless steel to ensure optimal adhesion of the epoxy resin. Follow the manufacturer's instructions carefully to achieve long-lasting and high-quality results.

How to Remove Epoxy Resin from Stainless Steel

To remove epoxy resin from stainless steel, you can follow these steps:

1. Gently heat the resin with a hairdryer to soften it and make it easier to remove.
2. Use a plastic scraper to gently remove the resin from the stainless steel without damaging the surface.
3. If needed, you can apply a specific solvent for epoxy resins on the affected area and let it sit for a few minutes before scraping off the resin.
4. Proceed with caution and repeat the process until you have completely removed the resin from the stainless steel.
5. Finally, clean the area thoroughly with water and soap to remove any remaining resin or solvent.

Epoxy resin solvent for stainless steel

The epoxy resin solvent for stainless steel is a specific product designed to effectively remove epoxy resin traces from stainless steel surfaces. This type of solvent is formulated to dissolve and remove the resin without damaging the underlying stainless steel. Before use, it is advisable to test the solvent on a small hidden area to check compatibility with the material. Make sure to carefully follow the manufacturer's instructions for a safe and effective application of the epoxy resin solvent on stainless steel.

Safe method to remove epoxy resin from stainless steel

To safely remove epoxy resin from stainless steel, it is advisable to follow these steps:

1. Gently heat the resin with a hairdryer to soften it and make it easier to remove.
2. Use a metal scraper or spatula to gently detach the hardened resin from the surface of the stainless steel.
3. Apply a specific solvent for epoxy resins to the affected area and let it sit for a few minutes to further soften the resin.
4. Carefully clean the stainless steel with a microfiber cloth to remove any residue of resin and solvent. By following these steps, you will be able to safely eliminate epoxy resin from stainless steel without damaging the material's surface.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85