Dissolving adhesive with a balanced action

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Dissolving adhesive with a balanced action

Dissolving adhesive with a balanced action requires the use of specific solvents capable of acting effectively without damaging the surfaces. To achieve optimal results, it is advisable to follow these guidelines:

• Choose a solvent suitable for the type of adhesive to be removed.
• Test the solvent on a small hidden area to check compatibility with the material.
• Apply the solvent to the adhesive surface and let it act for the necessary time.
• Use non-abrasive tools to remove the softened adhesive.
• Thoroughly clean the treated area to remove adhesive and solvent residues. By following these guidelines, it is possible to dissolve the adhesive safely and effectively, preserving the integrity of the treated surfaces.

Dissolving resin adhesive

To dissolve resin adhesive, it is advisable to use a specific solvent for resins, such as acetone or isopropyl alcohol. These products are capable of breaking down the adhesive without damaging the underlying resin. It is important to test the solvent on a small, inconspicuous area to verify compatibility with the material. Apply the solvent to the affected surface and let it sit for a few minutes to soften the adhesive. Subsequently, gently remove the dissolved adhesive with a scraper or a clean cloth. Finally, clean the area with water and soap to remove any solvent residues.

How to Remove Adhesive from Epoxy Resin

To remove adhesive from epoxy resin, you can follow these steps:

1. Start by gently heating the adhesive with a hair dryer to soften it.
2. Use a spatula or sandpaper to gently scrape off the adhesive from the surface of the resin.
3. If the adhesive is particularly stubborn, you can try using a mild solvent such as isopropyl alcohol to dissolve it.
4. Be sure to test the solvent on a small hidden area of the resin to check for compatibility.
5. After removing the adhesive, thoroughly clean the surface with a mild detergent to eliminate any residue. By following these tips, you can successfully and safely remove adhesive from epoxy resin.

Resin adhesive solvent

A resin adhesive solvent is a chemical compound designed to dissolve and remove hardened resin-based adhesives. This type of solvent is particularly useful for removing adhesive residues from resin surfaces without damaging them. It is important to choose a solvent specific to the type of resin and adhesive in question in order to achieve the best results without compromising the integrity of the surface. Before using a resin adhesive solvent, it is advisable to test its compatibility on a hidden area to avoid any potential damage or undesired alterations to the treated surface.

Safe method for dissolving adhesive

To safely dissolve an adhesive, you can follow these simple steps:

1. Use acetone or a specific solvent for the adhesive in question.
2. Apply the solvent directly to the adhesive and let it sit for a few minutes.
3. Use a scraper or a cloth to gently remove the softened adhesive.
4. Repeat the process if necessary until complete removal.
5. Make sure to ventilate the area well and wear protective gloves during the operation. By carefully following these steps, you can effectively and safely dissolve the adhesive.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85