Extended action mold release spray

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Extended action mold release spray

The extended action mold release spray is a product formulated to facilitate the removal of molds and casts in epoxy resin or silicone. Thanks to its special composition, this spray creates a thin layer between the material and the mold, allowing easy extraction without compromising the details and quality of the surface. This solution is particularly useful in the field of coatings and DIY, where precision and integrity of the artifacts are crucial. The prolonged action of this type of spray ensures greater durability and reliability in the extraction process, making it an essential tool for professionals and hobbyists.

How to Remove Epoxy Resin from Molds

To remove epoxy resin from molds, you can follow these steps:

1. Start by gently scraping off the hardened resin with a sharp tool.
2. Apply heat with a hairdryer to soften the resin and make it easier to remove.
3. Use solvents such as acetone or isopropyl alcohol to dissolve any remaining resin.
4. If needed, soak the object in a solution of hot water and detergent to further degrease it.
5. Finally, thoroughly wash the molds with water and soap to remove any residue of resin. By carefully following these steps, you can effectively remove epoxy resin from molds without damaging them.

Transparent Epoxy Resin Pigments

Transparent epoxy resin pigments are specifically formulated colorants designed to be mixed with clear epoxy resins. These pigments are intended to add color without compromising the transparency of the epoxy resin, allowing for the creation of artistic and decorative projects with vibrant and bright effects. Transparent epoxy resin pigments are available in a wide range of colors and can be used to dye epoxy resins for creating jewelry, artworks, coatings, and much more. Be sure to carefully follow the manufacturer's instructions to achieve the best results in your DIY artistic crafting.

DIY tutorial for creating jewelry with epoxy resin

Creating jewelry with resin is a creative and rewarding activity, perfect for DIY enthusiasts. Here is a brief tutorial to make unique jewelry:

1. Materials needed:
   • Transparent epoxy resin
   • Jewelry molds (silicone)
   • Resin colors and pigments
   • Jewelry accessories (rings, chains, earrings)
   • Gloves and a mask for safety
2. Procedure:
   • Thoroughly mix the resin following the manufacturer's instructions.
   • Add colors and pigments to achieve the desired effect.
   • Pour the resin into the molds and insert the jewelry accessories.
   • Let it dry for the specified time.
3. Finishing:
   • Once hardened, carefully remove the jewelry from the molds.
   • Optionally, polish the surfaces with fine sandpaper.
   • Assemble the accessories and components to complete your jewelry pieces. By following these simple steps, you can create stunning custom jewelry with resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85