Release agent spray for technical components

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent spray for technical components

The release agent spray for technical components is a product used to facilitate the removal of molds and patterns from resin or silicone surfaces. This type of spray creates a thin layer between the component and the molding material, allowing for easier separation and reducing the risk of damaging the piece during extraction. It is particularly useful in industrial settings and for DIY projects involving molds and molding of technical materials. Applying the release agent can help improve the quality of the manufactured items, reducing the risk of defects and simplifying extraction operations.

**How to Make Silicone Molds**

Creating silicone molds is a relatively simple process that requires precision and attention to detail. Here's how to proceed:

1. Prepare the model: Make sure the model to be replicated is clean and free of dust or dirt.
2. Measure and mix the silicone: Use a two-component silicone resin and follow the manufacturer's instructions for proper mixing.
3. Pour the silicone onto the model: Pour the silicone evenly over the model, making sure to cover it completely.
4. Remove air bubbles: To avoid air bubbles, you can use a vacuum device or gently tap the container.
5. Let it dry: Allow the silicone to cure for the necessary time, following the manufacturer's instructions.
6. Remove the model: Once dry, carefully remove the model from the silicone mold. By following these steps, you can create high-quality silicone molds for your DIY projects.

Epoxy resin colors

Epoxy resin colors are pigments specially formulated to be mixed with liquid epoxy resin to create custom colorations. These pigments are available in a wide range of shades and can be used to add nuances, marbled effects, or create detailed designs. It is important to carefully follow the manufacturer's instructions to properly dose the pigment and achieve the desired color. Before pouring the colored resin, it is advisable to perform some tests on small quantities to assess the final effect. Remember that the choice of colors for epoxy resin will significantly influence the appearance and finish of your project.

DIY Epoxy Resin Tutorial

Epoxy resin is a versatile and durable material, perfect for creating unique and long-lasting DIY projects. Here is a simple tutorial to get started:

1. Prepare the work area: make sure to work in a well-ventilated and protected environment.
2. Measure accurately: follow the instructions to mix the Epoxy resin and the hardener in the right ratio.
3. Add colors or pigments: if desired, you can customize the resin with colors or glitter.
4. Pour carefully: pour the resin onto your project, being careful not to create air bubbles.
5. Let it dry: allow the resin to cure for the recommended time in the instructions.
6. Finishing touches: once dry, you can sand and polish your project to make it perfect. By following these steps, you can create beautiful objects with Epoxy resin right in your own home.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85