Release agent spray that penetrates under labels

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent spray that penetrates under labels

The best release agent spray to penetrate under labels is formulated with a blend of specific solvents that effectively act on the adhesive without damaging the underlying material. This type of product is particularly useful for removing stubborn labels without leaving residues or damaging the surface underneath. Make sure to carefully follow the instructions for effective application and to test the product on a small hidden area to check compatibility with the material. Opting for a quality release agent spray ensures a clean and efficient removal of labels without compromising the integrity of the surface.

Release agent spray for epoxy resin

The release agent spray for epoxy resin is a product used to facilitate the removal of objects or molds from the cured epoxy resin. This spray creates a thin layer between the resin and the support, allowing for easier detachment and preventing damage to the surface. It is particularly useful in hobby and professional settings where working with epoxy resin is common. Before application, it is important to ensure that the support is clean and dry. Additionally, it is advisable to test the product on a small area to check compatibility with the resin being used.

How to Remove Epoxy Resin from Molds

To remove epoxy resin from molds, follow these steps:

1. Fill a container with warm water and mild soap.
2. Immerse the mold in the solution and let it soak for at least 30 minutes.
3. Use a soft-bristled brush to gently remove the softened resin.
4. If needed, repeat the process or use a specific solvent for epoxy resins.
5. Once clean, rinse the mold thoroughly with clean water and let it dry completely before reusing it. By following these instructions, you can effectively remove epoxy resin from molds safely and without damaging them.

Transparent Epoxy Resin Pigments

Transparent epoxy resin pigments are concentrated colorants used to dye clear epoxy resins. These pigments are designed to maintain the transparency of the resin while adding color and depth to the surface. They are available in a wide range of colors and shades to meet the creative needs of every resin project. Transparent epoxy resin pigments easily blend with the liquid resin before the curing process, allowing for the creation of artwork, DIY jewelry, and custom coatings with a unique and vibrant touch.

DIY techniques with epoxy resin

DIY techniques with epoxy resin offer endless creative possibilities. To start, you can create unique jewelry by incorporating dried flowers or colored pigments into the liquid resin. For more advanced projects, try making tables or table coatings by adding decorative elements such as stones, shells, or driftwood. If you want to personalize everyday objects like trays or jewelry boxes, epoxy resin is perfect for a shiny and durable finish. Remember to always carefully follow the mixing and safety instructions to achieve optimal results.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85