Protective spray for Corten steel

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Protective spray for Corten steel

To protect Corten steel from oxidation and wear, you can use specific protective sprays. These products are formulated with epoxy resins and silicone suitable for creating a weather-resistant protective film and resistant to the corrosive action of atmospheric agents. Before application, make sure the surface is clean and dry. The spray for protecting Corten steel is ideal for external coatings such as railings, facades, and sculptures. Be sure to carefully follow the manufacturer's instructions to ensure proper long-term protection of your Corten steel artifact.

Corten steel protective spray

The protective spray for Corten steel is a specific product designed to preserve and extend the lifespan of Corten steel, a material widely used in architecture and design for its characteristic rusted effect. By applying this type of spray on the surface of Corten steel, it is possible to create a protective layer that helps prevent further oxidation and maintain the material's aesthetics over time. It is important to carefully follow the manufacturer's instructions for correct application and ensure to repeat the treatment periodically to ensure effective and long-lasting protection.

How to protect corten steel

To protect corten steel from oxidation and extend its lifespan, it is advisable to follow some important steps:

1. Apply a specific protective coating for corten steel, such as epoxy or polyurethane-based paints.
2. Use silicone sealants to protect the joints and prevent water infiltration.
3. Regularly clean the surface with neutral detergents to remove dirt and residues.
4. Avoid the accumulation of stagnant water on the surface, which could accelerate the oxidation process.
5. Conduct periodic inspections to detect any signs of corrosion and intervene promptly. By following these guidelines, it is possible to maintain corten steel in good condition over time.

Rust-proof spray for Corten steel

Rust-proof sprays for Corten steel are specifically formulated to protect and preserve Corten steel surfaces from oxidation and corrosion. These products create a protective film that prevents rust formation, extending the lifespan and aesthetic appeal of Corten steel over time. Prior to application, it is essential to thoroughly clean the surface to ensure optimal product adhesion. Rust-proof sprays for Corten steel are ideal for DIY applications and can be used for both regular maintenance and preventive protection of outdoor Corten steel structures.

Protective paint for corten steel

The protective paint for corten steel is a specific product designed to protect and preserve the aesthetic and resistance characteristics of corten steel. This type of paint forms a protective film that prevents the corrosion of corten steel, preserving its natural rusted appearance. The protective paint for corten steel is weather-resistant, ensuring greater durability over time for the treated structure. Prior to application, it is important to thoroughly clean and prepare the surface to ensure optimal adhesion of the paint. Follow the manufacturer's instructions carefully for correct application and to achieve the best results.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85