Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook
If your injected resin remains sticky or soft long after expected curing, it can be frustrating and confusing. This guide covers common reasons and straightforward solutions to help you achieve flawless resin results.
Common Causes of Poor Resin Curing
Most curing issues start with incorrect mixing ratios or under-mixing. Every resin has specific instructions for how much of each component to use, and getting this wrong prevents them from reacting fully. Failing to mix the resin and hardener thoroughly (especially at the edges and bottom of your container) can also leave unmixed patches that stay tacky.
- Always check whether your resin is mixed by weight or by volume; One-2-One Epoxy Resin, for example, uses a simple 1:1 by volume ratio to simplify preparation.
- Scrape the sides and bottom while stirring for at least the recommended time.
- Avoid guessing quantities or using inaccurate measuring tools.
Practical Solutions and Next Steps
If your resin is still sticky after the full cure time, carefully check the product instructions and review your measuring and mixing process for any mistakes. Small areas of uncured resin may sometimes be scraped away or covered with a fresh, well-mixed batch, but if large areas remain soft, it’s usually best to remove all failed resin and start again.
For specific projects, consider choosing a resin product designed for easy mixing and reliable curing, like the “One-2-One” for crafts or IWhite Polyurethane Casting Resin for fast-setting applications.
When This Matters Most
Perfect resin curing is especially critical if the finished piece will be handled frequently, exposed to moisture, or used as jewellery. Tackiness can affect clarity, durability, and even cause skin irritation—so getting it right is essential for professional results.
Related products
Related guides
Understanding why resin stays sticky or soft can save both time and materials. By following careful techniques and choosing the right product for your project, you’ll avoid common pitfalls. For more troubleshooting and resin-injection tips, visit our main guide on how to inject resin.