What You’ll Need

• “Liquidissima” – Epoxy Resin For Creations & Jewellery
• “Evershine Collection” – Artisan Jewellery Epoxy Resin Kit with 100+ Accessories
• “UV–Creation” – Fast Acrylic Resin, 3 Minute UV Cure
• “One-2-One” – Epoxy Resin for Handcraft, 1:1 Mixing Ratio
• Silicone ring moulds
• Old or unused eyeshadow palettes (powder type works best)
• Mixing cups, stirrers, and gloves
• UV lamp (if using UV resin)
• Pipettes or small spoons for pigment transfer

Inspiration for Colourful Resin Jewellery

Experimenting with eyeshadow colours opens endless creative avenues in resin jewellery. Try incorporating metallics for a shimmering finish, or mix bold hues for modern, eye-catching effects. Consider using leftover broken eyeshadows for eco-friendly crafting and truly unique designs.

Step 1: Prepare Your Workspace and Materials

Begin by setting up an organised workspace. Always work in a well-ventilated area and wear gloves to protect your skin from resin contact. Prepare your silicone ring mould by ensuring it is clean and dry—any dust or moisture can affect the clarity of the final piece. Lay out all required tools and keep your chosen eyeshadow colours nearby, ready for use.

Measure your resin according to the manufacturer’s instructions. If using a kit such as the “Evershine Collection” – Artisan Jewellery Epoxy Resin Kit with 100+ Accessories, the 1:1 mixing ratio simplifies preparation and helps avoid mistakes.

Step 2: Mix the Resin and Add Eyeshadow

Carefully mix the resin with its hardener, following the exact ratio stated for your chosen resin. Stir slowly to minimise air bubbles. Only add eyeshadow pigments once the resin is fully prepared; scrape a small amount of powder from the eyeshadow palette and sprinkle it into the resin. Stir until the colour is dispersed evenly. Experiment with layering or blending shades to create striking visual effects.

With options such as “Liquidissima” – Epoxy Resin For Creations & Jewellery, long working time allows you to blend in the pigment thoroughly and carefully position the mixture in the mould.

Step 3: Pour and Cure Your Resin Ring

Pour the resin slowly and steadily into the mould to avoid introducing extra bubbles. If layering different eyeshadow pigments, pour in stages and allow each to settle. Tap the mould lightly to encourage trapped bubbles to rise and pop. Clean any spills around the edges before curing.

If you are using UV resin, such as “UV–Creation” – Fast Acrylic Resin, 3 Minute UV Cure, expose the filled mould to a UV lamp as per resin instructions—typically about three minutes. For epoxy resins, leave the mould undisturbed in a dust-free place, following the recommended curing time (often between 12 and 24 hours).

Step 4: Demould and Finish Your Resin Ring

Once the resin has fully set, gently remove the ring from the mould. Cure the ring thoroughly and allow it to cool before handling to prevent fingerprints or surface marks. Sand away any sharp edges using fine-grit sandpaper for a comfortable fit. Optionally, polish or coat the surface for added shine and durability.

If you prefer, use a comprehensive kit such as the “One-2-One” – Epoxy Resin for Handcraft, 1:1 Mixing Ratio for user-friendly finishing and professional-quality results.

Tips and Troubleshooting for Eyeshadow Resin Rings

Always use cosmetic-grade, dry powder eyeshadows to avoid issues with resin curing. Too much pigment can prevent the resin from setting, so start with small amounts and build gradually. If air bubbles persist, try using a toothpick or lightly warming the surface to release them. Mixing thoroughly and pouring in thin layers also helps prevent imperfections. If your ring appears cloudy, ensure both resin and moulds are completely clean and moisture free before starting.

Finishing Touches and Customisation Ideas

Personalise your resin rings by combining eyeshadows with glitters, dried flowers, or tiny beads. Adding these elements after the first resin pour will suspend them attractively within the ring. Make each piece your signature creation by experimenting with different moulds and embellishments.