What Mixing Ratios Are Used for Resins in Cube Making?

Typical Mixing Ratios for Popular Cube-Making Resins

• Liquidissima: Mix 3 parts resin with 2 parts hardener by weight for optimum results. This method ensures best clarity and flow for detailed cube casts.
• One-2-One: Recommended to mix equal parts resin and hardener by volume (1:1). This simplifies preparation, making it friendly for newcomers to resin cube making.
• Icrystal: Use a 2:1 ratio by volume or weight—2 parts resin to 1 part hardener. This blend is suited for clear, bubble-minimised cube layers up to 1.5cm.

No matter the product, always check the specific mixing instructions provided by the manufacturer, as methods can differ.

How to Mix Resin Correctly for Cubes

Begin by carefully weighing or measuring both parts with accurate scales or measuring jugs, depending on if your resin calls for a weight or a volume ratio. Slowly combine resin and hardener in a clean container and stir gently yet thoroughly, scraping sides and bottom to ensure a full mix. Under-mixing or inaccurate ratios may result in soft spots, cloudiness, or incomplete curing.

For projects where clarity and few bubbles are priorities, such as with Liquidissima resin, taking time to mix and pour steadily can make a marked difference.

When This Matters: Avoiding Common Mixing Pitfalls

Mistakes with ratios or mixing can lead to unexpected results—soft or sticky cubes, trapped bubbles, or incomplete cures. This is especially relevant for projects demanding precise finish, such as decorative keepsakes or gifts. Always allow yourself time to double-check measurements, and review the manufacturer’s guidance before each pour.