Allow the Resin to Reach the Right Viscosity

Why Viscosity Matters for Translucency

Viscosity describes how thick or fluid your epoxy resin is as it cures. When you aim for translucent effects—whether making jewellery, art pieces, or table tops—waiting for the resin to thicken slightly before adding tints or pouring makes a noticeable difference. Thicker resin is less likely to allow pigments to sink straight to the bottom, which helps you achieve gentle colour gradients and prevents them from dispersing uncontrollably.

When and How to Add Colourants

For the most striking translucent results, begin with a crystal-clear resin such as Liquidissima or the multipurpose Trasparente. Mix your resin according to the instructions, then wait until it thickens slightly—typically 20 to 30 minutes depending on the room temperature and resin brand. At this point, gently stir in a translucent pigment or add drops on the surface for techniques like Petri Art. Waiting prevents colours from bleeding or clouding your piece.

Practical Tips for Better Results

• Test viscosity: Dip a stir stick into the resin—if the drips slow down and form a thread, it’s likely ready for pigment or pouring.
• Control your working time: Have all materials prepped, as the window for perfect viscosity can be brief.
• Choose suitable colourants: For translucent effects, specialist pigment sets such as the Colourfun Set are designed to blend in smoothly without streaks or unwanted opacity.