Art Pro Resin Mixing Ratio for Sticker Coating

← Back to How to make resin-coated stickers

Achieving a glossy, durable finish on stickers is easy with Art Pro resin, provided you use the correct mixing ratio. Here’s what you need to know about preparing Art Pro for resin sticker coating projects.

The Precise Mixing Ratio

For best results, Art Pro resin should always be prepared using a 3:2 weight ratio—three parts resin to two parts hardener. Using accurate digital scales ensures the perfect balance, which is crucial for optimal curing and a crystal-clear finish.

Steps for Mixing and Application

Weigh out three parts of resin to two parts of hardener using a digital scale.
Mix slowly and thoroughly for a few minutes, ensuring there are no streaks left in the blend.
Pour carefully over your stickers on a flat, protected surface, allowing the resin to spread evenly for a smooth coat.
Use a heat gun or torch briefly to eliminate surface bubbles, then leave to cure undisturbed.

This method works especially well for clear, thick final coats above 1.5mm, providing a professional look. The Art Pro – Clear Epoxy Resin for Artists and Surface Coating is particularly suitable for this decorative application.

When Mixing Accuracy Matters

An incorrect ratio can cause curing problems, such as tacky surfaces or uneven finishes. Precision in mixing becomes especially important when creating decorative stickers for sale, gifts, or any project where clarity and durability are key.

Related guides

Getting the mixing ratio right is the first step to stunning resin-coated stickers. For additional techniques and creative tips, explore our main guide on how to make resin-coated stickers.