Best Release Agent for Epoxy Resin Moulds: Wax, Films & More

← Back to How do you keep epoxy resin from sticking to the mold?

Choosing the right release agent is crucial to prevent your epoxy resin castings from sticking to their moulds. This guide explores the best solutions for easy demoulding and flawless resin results.

Types of Release Agents for Resin Work

For non-silicone moulds, dedicated release waxes and self-adhesive release films are among the most effective barriers. Release waxes like “Global A2” create a protective film that helps your resin piece release cleanly from the mould without damaging the surface. Alternatively, self-adhesive films such as “Shiny Shield” provide a glossy, non-stick lining suitable for achieving a polished finish, especially on flat or frame-style moulds.

How to Use Release Waxes and Films

Wax Application: Apply a thin, even coat of release wax to your mould and allow it to dry for a few minutes. This method is especially good for complex shapes and various mould surfaces like wood, metal, or plastic. Check product instructions for specific drying times and compatibility.
Using Release Films: Cut to size, remove any protective liner, and lay the glossy side upwards in your mould or frame. Smooth to ensure there are no trapped air bubbles, then pour in your resin. Once cured, the film peels off easily, leaving no sticky residue or need for further finishing.

When a Release Agent Matters Most

Release agents are key when working with rigid or non-silicone moulds, particularly on large projects, deep pours, or when a perfect surface is essential. They also allow for quick, clean demoulding and can prolong the life of your mould by preventing build-up and surface damage.

Related guides

By selecting the right release agent for your mould and resin type, you can avoid frustrating sticking issues and achieve consistent results. For more guidance on keeping epoxy resin from sticking to your moulds, visit our main advice page.