Epoxy Binder for Coloured Pebbles and Grits

How Epoxy Binder Works for Pebble and Grit Surfaces

The binder is a two-part, transparent epoxy resin that is mixed with coloured pebbles or grits before application. This ensures each particle is thoroughly coated, delivering a uniform, bubble-free finish once cured. The resulting surface is not only attractive but also hard-wearing and stable, ideal for both DIY and professional projects. For best results, use only with dry, clean aggregates to allow full impregnation and optimal transparency.

Practical Application Tips

• Preparation: Begin by ensuring your substrate is stable and, if required, primed—such as with an epoxy primer on concrete or timber.
• Mixing: Thoroughly combine the epoxy binder with the chosen pebbles or grits in a clean vessel just before installation.
• Laying: Spread the mixture evenly using a trowel, working swiftly for a consistent layer no more than 2 cm deep to avoid compromising the curing process.
• Curing: It typically cures in about 24 hours, with foot traffic possible after 10 hours under normal conditions.

When to Use This Type of Binder

This epoxy binder is best suited for highly decorative and robust pebble floors, outdoor paths, garden features, and areas where a clear, UV-resistant finish will highlight the colour and form of the aggregates. It is especially valuable for installations in sun-exposed or high-traffic locations where resistance to yellowing and mechanical wear matters.