Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to How to set parameters for resin printers?
After completing a resin 3D print, the final surface quality can often be further enhanced. With the right post-processing steps, you can achieve a smoother, glossier, and more professional-looking finish that elevates your project.
Smoothing and Sealing with Coating Resins
Applying a specialist coating resin is an effective way to refine the appearance of 3D printed models. Products such as 3D Finish Fast Coating Epoxy Resin are designed specifically for enhancing prints made from PLA, ABS, or LAYWOOD. These coatings can eliminate visible layer lines, even out imperfections, and add a durable gloss or satin sheen. Simply mix according to the recommended ratio and brush on a thin, even coat. Allowing it to cure at room temperature ensures the finish remains smooth and detail is preserved.
Practical Tips for Better Post-Processing
Before applying any coating, make sure your print is fully cured and cleaned of any residues. Sanding lightly with fine grit paper can improve adhesion, and using slow, even brush strokes will help avoid drips or pooling. For best results, apply the coating in a well-ventilated space and allow for the full recommended curing time before handling or painting the print.
When Surface Enhancement Matters
Smoothing the finish is especially valuable for display models, prototypes, and parts intended for painting. Enhanced post-processing not only makes the print more attractive but also provides an extra layer of protection for delicate surfaces.
Related products
Related guides
Enhancing your prints after curing opens up new possibilities in quality and presentation. For more advice on optimising print parameters and other resin printing techniques, return to our guide on how to set parameters for resin printers.