Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to How to use epoxy glue?
Epoxy glue offers strong, lasting bonds—but only if applied correctly. Avoiding failures hinges on understanding a few essential steps before, during, and after application.
Get Your Surfaces Ready
A common cause of weak adhesion is poor surface preparation. Ensure all areas to be glued are thoroughly cleaned, dried, and free of oils, dust, or old finishes. Lightly roughen glossy surfaces with sandpaper for a better grip. Taking time at this stage ensures your epoxy bonds strongly to a well-prepared foundation.
Mix Epoxy Correctly—Accuracy Matters
Successful epoxy glue application depends on precise mixing and proportioning. Always follow the manufacturer’s instructions, typically blending equal parts resin and hardener in a 1:1 ratio. Mixing tools like a dedicated mixer nozzle help achieve a consistent blend and reduce waste. An uneven mix results in soft spots or incomplete curing, so stir thoroughly until the mixture is uniform in colour and texture.
Apply, Clamp, and Let Cure Fully
Once applied, the two surfaces must be pressed firmly together for the bond to form at full strength. Clamp or secure the surfaces, and avoid disturbing them until the adhesive is completely cured—this may take from five minutes to a few hours, depending on the product. Rushing this final step can introduce gaps or weaknesses in the joint.
When This Matters Most
- Bonding materials with different textures or porosity
- Repairing items subject to stress or load
- Outdoor or high-moisture applications
Related products
Related guides
Following these tips will help avoid common mistakes and deliver a robust, lasting result every time you use epoxy glue. For more details on best practices and product choices, see our main guide on how to use epoxy glue.