Two-component ceramic glaze

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Two-component ceramic glaze

The two-component ceramic glaze is a particularly resistant and durable coating, ideal for protecting ceramic surfaces subject to wear and external agents. Composed of two parts to be mixed before application, this type of glaze ensures greater adhesion and durability compared to the one-component counterpart. Its formulation based on epoxy or polyurethane resins ensures a finish resistant to abrasion, chemical agents, and high temperatures. Thanks to its versatility, the two-component ceramic glaze is widely used in the DIY and restoration sector to protect and enhance both indoor and outdoor ceramic surfaces.

Two-Component Enamel Tutorial

The tutorial on two-component enamel provides detailed instructions on the application of this type of enamel, composed of two parts that need to be mixed together before use. Here are the main steps for applying two-component enamel:

1. Preparation: Clean and sand the surface thoroughly where the enamel will be applied.
2. Mixing: Carefully follow the manufacturer's instructions to mix the two components of the enamel.
3. Application: Spread the enamel evenly on the surface using a brush or a roller, ensuring complete coverage.
4. Drying: Respect the indicated drying times and avoid any contact with water or moisture during this process. By following these steps correctly, it is possible to achieve a durable and high-quality final result with two-component enamel.

**Guide to Applying Ceramic Glaze**

Applying ceramic glaze is a crucial process to ensure a durable and high-quality finish. Here is a quick guide to effectively apply ceramic glaze:

1. Prepare the surface: Make sure the surface is clean, dry, and free of grease or dust.
2. Mix the glaze thoroughly: Stir the ceramic glaze well to ensure a uniform consistency.
3. Apply the glaze: Use a brush or a roller to apply the glaze in thin and even layers. Avoid overlaps and drips.
4. Let it dry: Respect the drying times indicated on the product before applying additional layers.
5. Seal the work: Finally, seal the work with a protective coating for enhanced durability and shine. By following these steps, you can achieve a professional and durable finish with ceramic glaze.

Two-component heat-resistant enamel

The two-component heat-resistant enamel is an ideal solution for protecting surfaces exposed to high temperatures. This type of enamel, composed of a resin and a hardener, offers superior resistance to high temperatures, ensuring a durable and quality finish. Thanks to its specific formulation, the application of this enamel ensures effective protection against heat and external aggressions. It is particularly suitable for surfaces subject to thermal stress, such as engine parts, pipes, or stoves. With the two-component heat-resistant enamel, it is possible to achieve a professional and long-lasting finish even in high-temperature environments.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85