Enamel for restructuring sanitary ware

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Enamel for restructuring sanitary ware

Enamel for restructuring sanitary ware is an ideal solution to give a new life to worn or damaged bathtubs, sinks, or shower trays. This type of enamel, specific for ceramic or porcelain surfaces, ensures a resistant and durable coverage, protecting against scratches and daily wear. Before application, it is essential to clean the surface thoroughly and sand any imperfections. Allowed to dry for the necessary time, the enamel for sanitary ware ensures a uniform and professional result, transforming old sanitary ware into like-new pieces at a low cost.

Sanitary enamel

Sanitary enamel is a type of durable paint designed to coat ceramic surfaces, such as sinks, bathtubs, and toilets. This coating provides effective protection against moisture, wear, and chemical agents found in environments like the bathroom. Sanitary enamel is engineered to withstand frequent cleanings and daily wear, maintaining the appearance and durability of ceramic surfaces over time. Its specific formulation ensures a uniform application and a long-lasting finish, ideal for those looking to effectively and durably rejuvenate their sanitary ware.

How to repaint sanitary fixtures

To repaint sanitary fixtures, you can use specific resin coating kits, preferably based on epoxy resin. Here are the steps to follow:

1. Thoroughly clean the sanitary fixtures to remove dirt and grease.
2. Lightly sand the surface to promote adhesion of the coating.
3. Apply a specific primer for resins to the entire surface.
4. Apply the resin coating with a brush or roller, following the manufacturer's instructions.
5. Allow to dry for the necessary time and apply any additional layers.
6. Once dry, seal the coating with a transparent sealant for greater durability. By carefully following these instructions, it is possible to repaint sanitary fixtures effectively and durably.

Bathroom Tile Paint

Bathroom tile paints are specific products that allow you to coat and renew existing tiles, offering an economical and quick solution to update the look of the bathroom. These paints are designed to resist moisture and the typical conditions of the bathroom environment, ensuring good adhesion and durability over time. Before application, it is important to thoroughly clean the tiles and ensure they are dry and free of mold. It is advisable to carefully follow the manufacturer's instructions to achieve the best results and ensure a uniform and resistant finish.

Sanitary enamel tutorial

To correctly apply enamel to sanitary ware, follow these steps:

1. Cleaning: make sure the surface is clean and dry.
2. Preparation: lightly sand the surface to promote enamel adhesion.
3. Application: apply the enamel in thin and even layers, allowing drying time between each coat.
4. Drying: let it dry for the time indicated on the packaging.
5. Finishing: if necessary, apply a coat of polish for a shiny finish.
6. Maintenance: avoid harsh detergents and clean with gentle products. By following these steps, you will achieve a professional and durable result over time.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85