Sanitary ware coating paint

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Sanitary ware coating paint

Sanitary ware coating paint is a specific product designed to coat and protect surfaces made of ceramic, porcelain, or other materials typically used in sanitary ware such as sinks, bathtubs, and shower trays. This type of paint is formulated to resist moisture, chemical agents, and abrasions typical of daily use in environments like the bathroom. Usually, sanitary ware coating paint is mold-resistant and provides a durable, high-quality finish. Proper surface preparation is important before application to ensure optimal adhesion of the paint and achieve long-lasting results over time.

Epoxy Paint for Sink

Epoxy paint for sinks is a durable and waterproof coating ideal for protecting and decorating sink surfaces. This paint, formulated with high-quality epoxy resins, ensures a long-lasting and easy-to-clean finish. When applied correctly, epoxy paint creates a protective layer that prevents scratches, stains, and moisture damage on the sink. Proper surface preparation is important before application to ensure optimal adhesion. Additionally, make sure to carefully follow the manufacturer's instructions to achieve the best results and ensure the long-term durability of the coating.

Bathtub Painting Tutorial

Painting a bathtub can be a rewarding DIY project. Here are the steps to correctly paint a bathtub:

1. Cleaning: Make sure the surface is clean and free of dirt and soap residue.
2. Sanding: Use fine-grit sandpaper to sand the bathtub and create a rough surface that promotes paint adhesion.
3. Primer: Apply a specific primer for bathtubs that helps the paint adhere better and resist moisture.
4. Painting: Use a specific water-resistant and durable paint for bathtubs. Apply at least two even coats following the manufacturer's instructions.
5. Drying: Allow the paint to fully dry for the recommended time before using the bathtub again. By following these steps, you can breathe new life into your bathtub with a long-lasting paint job.

How to coat sanitary ware with epoxy resin

Coating sanitary ware with epoxy resin is a process that allows you to renew and protect washbasins, bathtubs, or shower trays in a durable and personalized way. Here are the main steps to follow for an optimal result:

1. Cleaning: Make sure the surface is clean, dry, and free of soap or limescale residues.
2. Resin preparation: Thoroughly mix the epoxy resin with the catalyst following the proportions recommended by the manufacturer.
3. Application: Spread the compound evenly on the surface with a brush or roller, avoiding build-ups and air bubbles.
4. Drying: Allow it to dry completely following the indicated times.
5. Finishing: Apply a layer of transparent finish for greater resistance and gloss. By following these steps, you can coat your sanitary ware with epoxy resin effectively and professionally.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85