Composite materials repair

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Composite materials repair

Composite materials repair is a fundamental process to restore the structural integrity of damaged components. First and foremost, it is essential to assess the extent of the damage and identify the type of composite material involved. Subsequently, the damaged area is cleaned and prepared, removing residues and contaminants. The next step involves the application of epoxy or polyester resins reinforced with glass or carbon fibers, followed by catalyzation and hardening. Finally, sanding and finishing are carried out to restore the original appearance. It is advisable to carefully follow the manufacturer's instructions and, in case of doubts, consult an experienced professional.

Epoxy resin repair

Epoxy resin repair is a common process to correct damages or defects on epoxy resin surfaces. To carry out a proper repair, it is necessary to follow some fundamental steps:

1. Cleaning the damaged surface to remove dirt, grease, or residues.
2. Preparing the epoxy resin by thoroughly mixing the resin and the hardener according to the manufacturer's instructions.
3. Applying the resin to the damaged area using a brush or an applicator.
4. Leveling the resin to ensure a uniform appearance and complete coverage of the defect.
5. Allowing the resin to cure for the necessary time and, if needed, repeating the process to achieve optimal results. By carefully following these steps, it is possible to effectively repair damaged epoxy resin.

How to repair silicone prints

To repair damaged silicone prints, you can follow these steps:

1. Thoroughly clean the damaged area with isopropyl alcohol.
2. Use a transparent epoxy resin such as RESINPRO to fill any holes or cracks.
3. Level the resin with a spatula for a smooth surface.
4. Let it dry for the time indicated on the product.
5. If necessary, lightly sand the surface to make it smooth.
6. Apply a coat of transparent silicone to protect the repair and ensure a uniform appearance. By following these steps, you can effectively and durably repair silicone prints.

DIY Pigment Tutorial

DIY pigments are a versatile solution for coloring epoxy resins and silicones. To create custom pigments at home, follow these steps:

1. Purchase safe powdered pigments for use with resins and silicones.
2. Wear gloves and a mask for safety.
3. Mix the powdered pigment with the resin or silicone in the recommended ratio.
4. Thoroughly mix to evenly distribute the color.
5. Pour the colored mixture into molds or onto desired surfaces.
6. Let it dry or cure following the product instructions.
7. Admire the personalized and unique final result! With these simple steps, you can easily create DIY pigments for your artistic or crafting projects.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85