Pipe and Fittings Repair

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Pipe and Fittings Repair

Repairing pipes and fittings is a fundamental operation to ensure the correct functioning of plumbing systems. For DIY repairs, it is advisable to use specific epoxy resins for PVC, copper, or metal pipes. Before application, make sure that the repair area is clean and dry. The suitable epoxy resins provide good adhesion and resistance to water pressure. For damaged fittings, it is advisable to replace the damaged part with a new fitting compatible with the type of pipe in use. In case of doubts or difficulties, it is always advisable to consult a professional in the plumbing sector.

**Guide to Repairing Silicone Tubes**

Repairing silicone tubes is a simple operation that requires few tools and materials. Here is a quick guide to carry out this type of intervention:

1. Thoroughly clean the damaged area, removing any dirt or grease residues.
2. Cut away the damaged part of the tube with a sharp cutter.
3. Use a specific primer for silicone to prepare the surface and promote the adhesion of the new silicone.
4. Apply the new silicone with a silicone gun, making sure to spread it evenly.
5. Allow the silicone to dry for the time indicated on the package.
6. Verify that the repaired tube is completely dry before reusing it. By following these steps, it is possible to effectively and durably repair damaged silicone tubes.

Materials for repairing pipes with resin

Repairing pipes with resin is an effective and long-lasting process. The materials needed for this operation include epoxy or polyester resin, fiberglass tape, protective gloves, and mixing equipment. Epoxy resin is ideal for permanent repairs, while polyester resin is more economical but less resistant. Fiberglass tape ensures greater structural strength. It is important to carefully follow the mixing and application instructions of the materials to ensure an effective and long-lasting repair of the pipes.

DIY Fittings Repair Tutorial

Repairing DIY fittings is a simple and cost-effective operation that can be easily carried out even by those with no particular experience in the plumbing field. Here's how to proceed:

1. Damage assessment: Identify the exact point where the water leakage occurs.
2. Replacement of the damaged fitting: Purchase a new fitting of the same type and size.
3. Cutting and removal: Using a saw or pliers, cut the damaged fitting and remove it.
4. Cleaning and preparation: Ensure that the pipe ends are clean and smooth.
5. Installation of the new fitting: Use Teflon tape to ensure a tight seal.
6. Leak test: Check that the repaired fitting does not leak water. By carefully following these steps, you will be able to repair the fittings effectively and durably.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85