Ceramic Tile Adhesion

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Ceramic Tile Adhesion

Adhesion on ceramic is a fundamental process to ensure the correct fixing of materials such as tiles, mosaics, or ceramic coatings. To achieve effective and long-lasting adhesion, it is essential to carefully follow the following guidelines:

1. Surface preparation: Make sure that the ceramic is clean, dry, and free from glue residues or impurities.
2. Choice of adhesive: Use a specific adhesive for ceramics, based on the type of substrate and environmental conditions.
3. Application of the adhesive: Spread the adhesive evenly on the surface with a suitable notched trowel.
4. Placement of the ceramic: Press the ceramic firmly onto the adhesive, ensuring proper alignment.
5. Drying: Allow the adhesive to dry for the necessary time, following the manufacturer's instructions. By carefully following these guidelines, excellent adhesion on ceramic will be achieved.

Epoxy Resin Adhesion on Ceramic

The adhesion of epoxy resin on ceramic is a fundamental process to ensure good resistance and durability of the coating. To achieve optimal adhesion, it is essential to carefully follow some steps:

1. Surface preparation of the ceramic by thorough cleaning and, if necessary, mechanical treatments to increase roughness.
2. Use of specific primers to enhance adhesion between ceramic and resin.
3. Application of the resin following the manufacturer's instructions in terms of quantity, temperature, and curing times.
4. Possible post-application treatment to ensure perfect adhesion and long-term resistance. By following these guidelines, a strong adhesion of the resin on ceramic can be achieved, ensuring a quality final result.

Ceramic Resin Adhesion Tutorial

The adhesion of ceramic resin is a fundamental process to ensure the durability and resistance of coatings. Here are some essential steps to follow for a correct application:

1. Surface preparation: ensure it is clean, dry, and free from grease or dust residues.
2. Apply the primer: this helps to increase the adhesion of the resin to the surface.
3. Mix the resin: carefully follow the manufacturer's instructions to achieve the correct consistency.
4. Apply the resin on the ceramic: spread it evenly with a brush or roller to avoid air bubbles.
5. Dry and cure: allow it to dry completely according to the recommended drying times. By following these steps, you will achieve an effective and long-lasting adhesion of the ceramic resin.

Epoxy resin for ceramics

Epoxy resin is a widely used material in the ceramic industry for its ability to create transparent and protective finishes. In the field of ceramics, epoxy resin is used to coat and protect surfaces, providing them with resistance and brilliance. This type of resin is particularly appreciated for its ability to adhere well to ceramics and withstand wear over time. To apply epoxy resin to ceramics, it is important to carefully follow the manufacturer's instructions and ensure that you work in a well-ventilated environment to avoid inhaling harmful fumes during the curing process.

How to glue epoxy resin on ceramic

To glue epoxy resin on ceramic, it is important to carefully follow these steps:

1. Thoroughly clean the surface of the ceramic to remove dirt, grease, or residues of old glues.
2. Apply a specific adhesive primer for ceramics on the surface and let it dry completely.
3. Prepare the epoxy resin according to the manufacturer's instructions, carefully mixing the two components.
4. Apply the resin on the ceramic surface evenly using a brush or an applicator.
5. Press the resin firmly onto the ceramic to ensure good adhesion.
6. Allow the resin to dry for the time recommended by the manufacturer before using the glued object.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85