Regenerating poles and railings

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Regenerating poles and railings

Regenerating poles and railings can be achieved by applying specific protective coatings. Before starting, it is essential to thoroughly clean the surfaces to remove dirt, oxidation, and residues of old coatings. Subsequently, epoxy or polyurethane resins can be applied, ensuring effective protection against weathering and corrosion. Alternatively, specific metal paints, properly primed, can be used. The regeneration process requires attention to detail and the use of high-quality products to ensure long-lasting and aesthetically pleasing results.

Epoxy resin for regenerating poles and railings

Epoxy resin is an excellent material for regenerating damaged poles and railings. Thanks to its strength and durability, it is able to effectively restore the original structure. To use it correctly, follow these simple steps:

1. Thoroughly clean the damaged surface.
2. Mix the epoxy resin with its hardener following the manufacturer's instructions.
3. Apply the compound to the damaged part, making sure to completely fill any cracks or holes.
4. Allow it to dry and cure completely according to the recommended drying times.
5. Finally, polish and finish the repaired surface for a uniform and long-lasting result.

How to Regenerate Rusty Poles

To regenerate rusty poles, you can follow these steps:

1. Preparation: Remove the rust with a wire brush or coarse sandpaper.
2. Cleaning: Clean the pole with a degreasing detergent to remove dirt and grease residues.
3. Epoxy Resin Application: Apply a layer of epoxy resin on the pole's surface to protect it from rust and weathering agents.
4. Anti-Rust Primer Application: Apply a specific anti-rust primer for metal to ensure long-lasting protection.
5. Final Coating: Apply a weather-resistant protective coating to complete the regeneration process. By following these simple steps, it is possible to effectively regenerate rusty poles.

**Tutorial on How to Repair Grilles with Epoxy Resin**

Repairing grilles with epoxy resin is an effective and long-lasting process. Here is how to proceed:

1. Preparation: Thoroughly clean the damaged area by removing rust and dirt.
2. Application of Epoxy Resin: Mix the epoxy resin with the hardener according to the manufacturer's instructions. Apply the compound to the damaged surface using a spatula.
3. Leveling: Level the resin with the spatula to ensure a smooth surface.
4. Curing: Allow the resin to dry and cure for the time indicated on the manufacturer's instructions.
5. Finishing: Sand the repaired surface to make it smooth and uniform. By following these steps carefully, you can effectively repair grilles with epoxy resin.

Pigments for coloring resin for external poles

Pigments for coloring resin for external poles are formulated to withstand weather conditions and ensure durability and vibrancy over time. These pigments are specifically designed to be mixed with epoxy or polyurethane resins, offering a wide range of colors to creatively and durably customize external poles. Be sure to carefully follow the manufacturer's instructions to achieve optimal results. Before applying the colored resin to the external pole, make sure the surface is clean, dry, and properly prepared to ensure proper adhesion and a high-quality finish.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85