Reinforcing deteriorated metal

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Reinforcing deteriorated metal

To reinforce deteriorated metal, it is possible to use high-strength epoxy resins. Once cured, these resins create a solid and resistant coating that helps repair and reinforce damaged metal parts. Another option is the use of high-resistance silicones, capable of forming a protective layer that helps prevent further damage and corrosion. Both solutions are easily available on the market and can be applied even in a DIY context with the necessary precautions. It is important to carefully follow the manufacturer's instructions to ensure correct application and a long-lasting result.

Epoxy resin for metal

Epoxy resin for metal is a protective and decorative coating used to protect and enhance metal surfaces. This type of resin, composed of two components that react with each other to form a solid and resistant material, offers numerous advantages. Among these, the ability to create an effective barrier against corrosion, oxidation, and wear, as well as to ensure an aesthetically pleasing finish. Epoxy resin for metal is widely used in the DIY sector and in industries, thanks to its versatility and long-lasting properties. It is important to carefully follow the application instructions to achieve optimal and durable results.

How to repair metal with epoxy resin

Repairing metal with epoxy resin is an effective and long-lasting process. Here's how to proceed:

1. Thoroughly clean the metal surface to be repaired to remove dirt, grease, and rust.
2. Lightly sand the damaged area with fine sandpaper to promote adhesion of the resin.
3. Prepare the epoxy resin by thoroughly mixing the resin and hardener according to the manufacturer's instructions.
4. Apply the resin to the damaged surface and ensure it completely fills any cracks or holes.
5. Allow the resin to dry and cure completely according to the recommended drying times.
6. Optionally, sand and paint the repaired area for a uniform and protective finish. By carefully following these steps, you will achieve an effective and durable metal repair using epoxy resin.

Silicone Molds Tutorial for Metal Restoration

To create silicone molds for metal restoration, follow these steps:

1. Prepare the model: make sure the piece to be reproduced is clean and free of dust.
2. Measure and mix the silicone: use silicone resin and catalyst according to the proportions recommended by the manufacturer.
3. Pour the silicone onto the model: place the piece on a flat surface and pour the silicone evenly, avoiding air bubbles.
4. Wait for the drying time: allow the silicone to harden for the specified time.
5. Remove the model and use the mold to restore the metal with epoxy resin or other suitable resins. By following these steps, you can create silicone molds for precise and professional metal repair.

Epoxy Resin Pigments for Metal

Epoxy resin pigments for metal are specifically formulated to be mixed with epoxy resins and used to color and decorate metal surfaces. These pigments, available in different shades and formats, are designed to ensure perfect adhesion to the metal surface and high resistance to weathering and wear. Before application, it is essential to thoroughly prepare the metal surface by removing any traces of dirt, grease, or oxidation. Additionally, it is advisable to test the desired color on a sample to verify the final result. Using epoxy resin pigments on metal offers the possibility to customize and protect metallic artifacts in a creative and long-lasting way.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85