Treating rusty tanks

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Treating rusty tanks

Rust on tanks can compromise their structural integrity and effectiveness. To treat rusty tanks, follow these steps:

1. Cleaning: Remove the rust with wire brushes or grinders.
2. Surface preparation: Sand and degrease the tank to remove oily residues.
3. Application of anti-rust primer: Apply a specific primer for rusty metal.
4. Coating application: Use a corrosion-resistant coating, such as epoxy resins or polyurethanes.
5. Drying and curing: Allow the coating to dry completely following the manufacturer's instructions. This process will help protect the tank from further corrosion.

EPOXY RESIN

Epoxy resin is a versatile material widely used to create protective coatings and durable surfaces. This thermosetting resin, once cured, provides a surface resistant to chemicals, wear, and impacts. It is particularly appreciated in the DIY sector for its ease of use and the ability to adhere to various surfaces such as wood, metal, and plastic. Epoxy resins are available in different formulations with specific properties, such as transparency, UV resistance, and fast curing. They can be colored with pigments and used to create decorative coatings and high-quality finishes.

How to treat rusty tanks with epoxy resin

Treating rusty tanks with epoxy resin is an effective process to restore their integrity. Here are the steps to follow:

1. Preparation: Clean the tank by removing rust with wire brushes and sandpaper.
2. Resin application: Wear gloves and a mask. Apply the epoxy resin to the damaged areas using a brush or roller. Make sure to cover the surface evenly.
3. Drying: Allow the resin to dry for the time indicated by the manufacturer. Ensure that the environment is well-ventilated.
4. Inspection: Check that the resin has solidified correctly and that there are no leaks. By following these steps, you can successfully treat rusty tanks with epoxy resin.

Best techniques for repairing rusty tanks

Repairing rusty tanks can be effectively done by following these best techniques:

• Removal of rust with wire brushes or fine sandpaper.
• Application of a rust converter to treat the affected surfaces.
• Use of epoxy or polyurethane resins to seal the damaged areas.
• Application of anti-corrosive primer before repainting the tank.
• Periodic inspection of the corrosion status and timely repair of affected areas.
• If necessary, consult a professional for more complex repairs or for a thorough evaluation of the situation. By following these techniques, it is possible to effectively repair rusty tanks and preserve their integrity over time.

Tutorial: How to Protect Rusty Tanks with Epoxy Resin

Protecting rusty tanks with epoxy resin is an effective process to prevent further damage and extend their lifespan. Here's how to proceed:

1. Cleaning: Remove rust and dirt from the tank using a wire brush and sandpaper.
2. Preparation: Ensure the tank is dry and free of residues.
3. Resin Application: Spread the epoxy resin evenly on the tank using a brush or roller.
4. Drying: Allow the resin to dry completely according to the manufacturer's instructions.
5. Inspection: Check that the coating is uniform and free from defects. This process effectively helps protect rusty tanks, prolonging their service life.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85