Release agent with deep and safe action

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent with deep and safe action

The release agent with deep and safe action is a product mainly used in the field of epoxy resins and silicone to facilitate the separation of surfaces during the molding or casting process. This type of release agent effectively ensures complete and uniform separation between the material and the mold, minimizing the risk of damage to shapes or surfaces. Thanks to its deep action, it ensures easy residue-free removal, contributing to achieving high-quality results. It is particularly appreciated in the DIY sector for its reliability and convenience.

- Epoxy resin mold release agent

The epoxy resin mold release agent is a product used to prevent epoxy resin from sticking to surfaces during the processing. It is a substance applied to mold surfaces or supports to facilitate the subsequent removal of the cured resin. The release agent creates a barrier between the resin and the support, minimizing the risk of damaging the artifact during extraction. Choosing a specific mold release agent for epoxy resins is important to ensure optimal results and easy processing of materials.

How to Remove Epoxy Resin from Silicone Molds

To remove epoxy resin from silicone molds, you can follow these steps:

1. Prepare a solution of warm water and mild soap.
2. Immerse the mold in the solution and let it soak for a few minutes.
3. Use a soft brush to gently scrub the affected areas.
4. If necessary, repeat the process several times until the resin is completely removed.
5. Alternatively, isopropyl alcohol can be used to dissolve the resin more effectively.
6. Finally, rinse the mold thoroughly with clean water and let it dry completely before reusing it. By following these tips, you will be able to effectively clean epoxy resin from silicone molds safely and without damaging them.

Release agent for DIY molds

The release agent for DIY molds is a product used in the DIY sector to facilitate the removal of artifacts from molds. It is a substance that, once applied to the surfaces of the molds, reduces the adhesion of materials, such as epoxy resins or silicones, allowing for easy extraction of the artifact without damaging either the product or the mold itself. This type of release agent is particularly useful to prevent the artifact from sticking to the mold, simplifying the process of creating objects in resin or silicone in the context of DIY.

Safe pigment release agent

A safe pigment release agent is essential to achieve proper separation between the pigment and the material it is applied on. Usually made with specific resins or silicones, this type of release agent prevents damage to the surface and ensures easy removal of the pigment once the processing is completed. It is particularly useful in the coatings and DIY sector, where precision and attention to detail are crucial. Make sure to choose a release agent compatible with the type of pigment and surface to ensure optimal results and easy final cleaning.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85