Release agent for fresh epoxy adhesives

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent for fresh epoxy adhesives

The release agent for fresh epoxy adhesives is a product used to prevent adhesion and facilitate the removal of residues of adhesives that have not yet hardened. This product is particularly useful in situations where it is necessary to temporarily separate two surfaces glued with epoxy resins. By applying the release agent uniformly on the desired surface, it is possible to prevent the fresh adhesive from adhering permanently. It is important to carefully follow the manufacturer's instructions to ensure the correct and safe use of the release agent for fresh epoxy adhesives.

Epoxy resin mold release agent

The epoxy resin mold release agent is a fundamental product in the field of resins. This anti-adhesive agent is used to facilitate the removal of epoxy resins from mold surfaces, silicone molds, or other supports during the processing phase. By uniformly applying the release agent to the surface, the risk of resin adhesion to the support is significantly reduced, simplifying the extraction of the finished product. It is important to select the most suitable release agent based on the type of epoxy resin used and the working support to ensure efficient processing and the highest quality of the final product.

How to Remove Epoxy Resin from Molds

To remove epoxy resin from molds, follow these steps:

1. Fill a container with warm water and mild soap.
2. Immerse the mold in the solution to soften the resin.
3. Use a soft brush to gently remove the softened resin.
4. If any residues persist, apply denatured alcohol with a clean cloth.
5. Repeat the process until the mold is clean.
6. Rinse thoroughly and dry the mold well. This method is effective for cleaning molds from epoxy resin without damaging them. Remember to wear gloves and work in a well-ventilated area during the operation.

Epoxy resin solvent

An epoxy resin solvent is a chemical compound used to dissolve and remove cured epoxy resins. This type of solvent is essential for cleaning equipment, tools, and surfaces contaminated with epoxy resin. It is important to choose a specific solvent for epoxy resins as not all solvents are effective for this purpose. Epoxy resin solvents can be used in industrial, artisanal, or DIY environments for cleaning pins, brushes, or removing resin residues from undesired surfaces.

Silicone mold release agent

The silicone mold release agent is a fundamental product in the field of epoxy resins and silicone processing. This compound, usually in the form of spray or liquid, is used to facilitate the removal of creations from silicone molds, ensuring a longer lifespan for the molds. By applying the release agent evenly on the mold surfaces, it prevents resins or silicones from adhering excessively, thus facilitating the subsequent extraction without damaging either the finished product or the mold material. Choosing a specific release agent for silicone molds is important to ensure an optimal result.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85