Release agent for professional adhesives

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent for professional adhesives

A release agent for professional adhesives is a product used to prevent glue adhesion and transfer on undesired surfaces during bonding works. This type of release agent is particularly useful in industrial and artisanal settings, where avoiding damage to work surfaces is crucial. Typically, it is sprayed or spread on the areas surrounding the bonding area, creating a barrier that prevents the adhesive from sticking. Release agents for professional adhesives are available in various forms such as liquids, sprays, or wax, and are designed to be compatible with a wide range of resins and silicones.

Epoxy Resin Mold Release Agent

An epoxy resin mold release agent is a product used to facilitate the removal of casts or molds in epoxy resin without damaging them. This product creates a barrier between the surface of the cast and that of the mold material, preventing adhesion and facilitating detachment. Epoxy resin mold release agents are available in different forms, such as sprays, liquids, or wax, and are chosen based on the type of epoxy resin and mold material used. It is important to carefully follow the application instructions and ensure that the release agent is compatible with the epoxy resin to achieve optimal results.

How to use mold release agent for silicone molds

To correctly use the mold release agent for silicone molds, follow these steps:

1. Make sure the silicone is completely dry before applying the release agent.
2. Shake the release agent well and spray it evenly onto the mold from a distance of about 20-30 cm.
3. Allow the release agent to dry for a few minutes before pouring the resin into the mold.
4. After use, carefully clean the mold to remove any residue of the release agent.
5. Remember to reapply the release agent before each use to ensure easy extraction of the artifact. By carefully following these instructions, you can achieve optimal results when using the mold release agent for silicone molds.

Best Mold Release Agents for Resin Pigments

The best mold release agents for resin pigments are those based on silicone. These release agents are designed to improve the dispersion and mixability of pigments in resins, facilitating the creation of uniform and durable coatings. Silicone-based release agents are particularly effective in the resin sector, as they ensure better adhesion and greater resistance to environmental conditions. Additionally, they are easy to apply and offer high compatibility with a wide range of resins and pigments. Choosing a quality release agent is essential for achieving optimal results in the DIY resin coatings sector.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85