Removing uncured adhesives safely

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing uncured adhesives safely

To safely remove uncured adhesives, it is important to follow specific procedures to avoid risks and damages. Here is what to do:

1. Use specific solvents for removing uncured adhesives, avoiding the use of aggressive substances.
2. Always wear personal protective equipment such as gloves, goggles, and a mask to prevent direct contact with the solvents.
3. Work in a well-ventilated area or use a gas mask to avoid inhaling harmful fumes.
4. Follow the solvent manufacturer's instructions carefully and respect the indicated action times.
5. Dispose of waste in accordance with local environmental regulations. By following these precautions, you can safely remove uncured adhesives.

How to safely remove uncured resin

To safely remove uncured resin, it is important to follow a few steps. First, use gloves and protective goggles to avoid direct contact with the skin and eyes. You can start by gently scraping the resin with a spatula or scraper. Next, you can use a specific solvent for resins, such as acetone, to dissolve the remaining resin. Make sure to ventilate the area well during the operation and carefully follow the manufacturer's instructions for the solvent. Finally, clean the area with water and soap to remove any residues.

Procedures for disposing of uncured epoxy resin

To dispose of uncured epoxy resin, it is important to follow some specific procedures:

1. Scraping: Use a sharp tool to scrape away the uncured resin from the surface.
2. Solvents: Try using solvents such as acetone or isopropyl alcohol to dissolve and remove the resin.
3. Heating: Apply heat with a hairdryer to soften the resin and facilitate its removal.
4. Sandpaper: If the resin is on a resistant surface, you can use sandpaper to sand it off.
5. Detergents: Alternatively, try using degreasing detergents to dissolve the resin. By following these procedures, it is possible to successfully remove uncured epoxy resin from the desired surfaces.

Removing uncured epoxy resin correctly

To correctly remove uncured epoxy resin, you can follow these steps:

1. Wear latex gloves and ensure good ventilation in the area.
2. Use a cloth soaked in acetone to gently dab the still liquid resin.
3. If the resin has partially solidified, carefully scrape it off using a scraper or spatula.
4. If the resin has fully hardened, it is recommended to use a specific epoxy resin solvent.
5. Apply the solvent to the affected area and let it work following the manufacturer's instructions.
6. Scrape off the softened resin carefully, avoiding damage to the underlying support. By carefully following these instructions, it will be possible to effectively remove uncured epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85