Removing adhesive residues from double-sided tape

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing adhesive residues from double-sided tape

To remove adhesive residues from a double-sided tape, you can follow these steps:

1. Start by gently peeling off the double-sided tape from the surface.
2. Use isopropyl alcohol or acetone on a cotton ball to dab the remaining adhesive residues.
3. Let the solvent sit for a few minutes to soften the residue.
4. With a clean cloth, gently rub the adhesive residue until it is completely removed.
5. Finally, wash the surface with water and soap to eliminate any residual traces of the solvent. These steps should help you effectively remove the adhesive residues from the double-sided tape without damaging the underlying surface.

Adhesive tape double-sided glue residues

Residues of double-sided adhesive tape glue can be annoying to remove, but there are some effective methods to do so without damaging the surfaces. Here's what you can do:

• Vegetable oil: apply oil on a cloth and gently dab the residues.
• White vinegar: mix water and vinegar in equal parts, then use a soaked cloth to clean the area.
• Hairdryer: gently heat the residues with a hairdryer and then remove them with a clean cloth. By following these simple tips, you can effectively and safely remove double-sided adhesive tape glue residues.

How to Remove Adhesive from Double-Sided Tape

To remove the residual adhesive from a double-sided tape, you can follow these steps:

1. Dampen a cloth with warm water and mild detergent.
2. Apply the cloth to the adhesive and let it sit for a few minutes to soften it.
3. Use a spatula or a stiff card to gently scrape off the excess adhesive.
4. If necessary, repeat the process until the adhesive is completely removed.
5. Finally, dry the area thoroughly with a clean cloth. Avoid using aggressive solvents that could damage the surfaces. If the adhesive is particularly stubborn, you may consider using a specific solvent for resins or silicones.

Adhesive residues from double-sided tape

Adhesive residues from double-sided tape can be easily removed with some effective methods. Here's what you can do to eliminate them efficiently:

• Use isopropyl alcohol to dissolve the excess adhesive.
• Try gently scraping off the residues with a spatula or a stiff card.
• Apply coconut or olive oil to soften the adhesive and facilitate its removal.
• Use a hairdryer to gently heat the adhesive, making it easier to peel off. By following these tips, you can effectively remove adhesive residues from double-sided tape without damaging the underlying surfaces.

Removing residue glue from double-sided tape

To remove residue glue from double-sided tape, you can follow these steps:

1. Dampen a soft cloth with warm water and mild detergent.
2. Apply the cloth to the area with the residue glue and let it sit for a few minutes.
3. Use a spatula or stiff card to gently scrape off the softened glue.
4. If necessary, repeat the process until the glue is completely removed.
5. Finally, thoroughly dry the area with a clean, dry cloth. This method is effective for cleaning residue glue from surfaces without causing damage.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85