Removing double-sided adhesive residues

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing double-sided adhesive residues

To remove double-sided adhesive residues, you can follow these steps:

1. Apply a specific solvent for resins, such as acetone or isopropyl alcohol, on the affected surface.
2. Let the solvent act for a few minutes to soften the double-sided adhesive residues.
3. Use a scraper or a spatula to gently remove the softened residues.
4. If necessary, repeat the process until you have completely removed the residues.
5. Finally, clean the surface with water and soap to remove any solvent residues. Always remember to test the solvent on a small hidden area to check compatibility with the underlying material.

- Removing Epoxy Adhesive Residues

To effectively remove epoxy adhesive residues, you can follow these steps:

• Dampen a cloth with acetone and gently dab the affected area.
• Use a scraper to delicately remove the softened residues.
• If residues persist, repeat the process or use a plastic spatula to avoid surface damage.
• After removing most of the adhesive, clean the area with water and mild soap.
• If needed, use a specific cleaner to thoroughly clean the surface without causing any damage. By following these steps, you can safely eliminate epoxy adhesive residues without harming the underlying surface.

Removing double-sided adhesive residues

To remove traces of double-sided adhesive, you can follow these steps:

1. Dampen a cloth with warm water and a mild detergent.
2. Gently dab the affected area to soften the double-sided adhesive.
3. Use a spatula or a stiff card to gently lift the double-sided adhesive.
4. If necessary, repeat the process until all traces of the adhesive are completely removed.
5. Finally, clean the area with clean water and dry it with a cloth. This method is effective for removing double-sided adhesive residues from surfaces without causing damage. It is important to pre-test on a small area to check compatibility with the material.

Cleaning epoxy adhesive residues

To clean epoxy adhesive residues, you can follow these steps:

1. Soften the adhesive: Apply heat to the surface with a hairdryer to soften the adhesive and make it easier to remove.
2. Scrape gently: Use a spatula or sandpaper to scrape off the adhesive residues, being careful not to damage the underlying surface.
3. Clean with solvents: Use acetone or isopropyl alcohol to remove any adhesive residue remaining on the surface.
4. Wash with soap and water: Finally, wash the treated area with soap and water to completely remove solvent residues. By following these simple steps, it will be possible to effectively clean epoxy adhesive residues safely and accurately.

How to Remove Adhesive Residue

To remove adhesive residue, follow these steps:

1. Dampen a cloth with warm water and mild detergent.
2. Gently dab the affected area to soften the adhesive.
3. Use a plastic scraper to carefully remove the adhesive residue without damaging the surface.
4. If necessary, repeat the process until the marks are completely eliminated. Avoid using aggressive solvents that may harm the surface. Before proceeding, make sure to test the detergent on a small hidden area to check its compatibility with the material.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85