Cleaning uncured epoxy adhesive

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Cleaning uncured epoxy adhesive

Cleaning uncured epoxy adhesive can be done by following some simple steps:

1. Scraping: Use a scraper or a spatula to gently remove the uncured adhesive from the surface.
2. Solvent: If necessary, you can try using a specific solvent for epoxy resins to dissolve the excess adhesive. Make sure to follow the manufacturer's instructions and test the solvent on a small hidden area before use.
3. Sandpaper: If residues remain, you can lightly sand the surface with fine-grit sandpaper to eliminate any traces of adhesive.
4. Final cleaning: Finally, clean the treated area thoroughly with a degreasing detergent to remove any epoxy adhesive residue. Always remember to wear gloves and follow the safety precautions indicated on the products used.

Cleaning uncured epoxy resin

Cleaning uncured epoxy resin can be done with simple precautions. Here's how to proceed:

1. Use a solvent such as isopropyl alcohol to remove the still fresh resin from the surface.
2. Make sure to act promptly to prevent the resin from fully hardening.
3. Use a scraper or spatula to gently remove excess resin.
4. If necessary, repeat the cleaning process several times until the surface is completely clean.
5. Be careful not to damage the underlying surface during cleaning. By following these simple instructions, it will be possible to effectively clean uncured epoxy resin.

Removing liquid epoxy adhesive

To remove liquid epoxy adhesive, you can follow these steps:

1. Wear protective gloves and work in a well-ventilated area.
2. Soften the adhesive with acetone or isopropyl alcohol, using a cotton ball.
3. Gently scrape off the softened adhesive with a spatula or fine-grit sandpaper.
4. If necessary, repeat the process until the adhesive is completely removed.
5. Clean the area with soap and water to eliminate any residues. It is important to always test the product on a small hidden area to check compatibility with the underlying material. If in doubt or facing difficulties, it is advisable to consult a professional in the field.

Cleaning fresh epoxy resin

Cleaning fresh epoxy resin is essential to ensure a flawless final result. Here are some steps to follow to clean fresh epoxy resin properly:

1. Use a clean cloth dampened with isopropyl alcohol to remove any resin residues.
2. If the resin is still soft, you can gently scrape it off with a non-abrasive tool, such as a plastic spatula.
3. If the resin has hardened, you can use fine-grit sandpaper to smooth out any imperfections.
4. To complete the cleaning process, wipe down with a clean cloth dampened with water and mild soap to remove any remaining residues. By following these steps, you can effectively clean fresh epoxy resin without causing any damage to it.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85