Removing stickers in a few minutes

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing stickers in a few minutes

To remove stickers in a few minutes, you can use an effective and fast method. Here's how to do it:

• Moisten the sticker with hot water and mild soap to soften it.
• Use a hairdryer to heat the sticker and make it easier to peel off.
• Apply olive oil or coconut oil on the sticker to dissolve it.
• If the sticker is on a resistant surface, such as glass, you can try to gently scrape it off with a plastic spatula.
• Finally, clean any residue with a specific detergent for the surface in question. By following these steps, you will be able to remove stickers quickly and effectively.

- Removing Glue from Epoxy Resin

To remove glue from epoxy resin, it is advisable to follow these steps:

1. Use a scraper or spatula to gently remove most of the hardened glue.
2. Apply a mild solvent such as acetone or isopropyl alcohol to the affected area.
3. Gently blot with a microfiber cloth to absorb the dissolved glue.
4. Repeat the solvent application and blotting until the glue is completely removed.
5. Clean the surface with water and mild soap to remove any solvent residues. It is important to test the solvent on a small hidden area of the resin to check compatibility and avoid damage to the surface.

How to Remove Stickers from Epoxy Resin

To remove stickers from an epoxy resin surface, you can follow these simple steps:

1. Gently heat the sticker with a hairdryer to soften it.
2. Use a spatula or a plastic card to gently peel off the sticker from the resin.
3. If there are glue residues left, you can use isopropyl alcohol to dissolve them.
4. Clean the surface with a mild detergent to remove any traces of adhesive residue.
5. Finally, thoroughly dry the resin to prevent the formation of streaks. By following these tips, you can effectively remove stickers without damaging the underlying resin.

Removing stickers from epoxy resin

To remove stickers from epoxy resin, it is advisable to follow these steps:

1. Use a hairdryer to gently heat the sticker, softening it.
2. Use a spatula or a scraper to delicately remove the sticker from the surface.
3. Apply a specific solvent for epoxy resin with a clean cloth, being careful not to damage the underlying resin.
4. Repeat the process until the sticker is completely removed.
5. Clean the surface with water and soap to eliminate any solvent residues. It is important to test the solvent on a small hidden area before use to check compatibility with the epoxy resin.

Quick method to remove adhesive from epoxy resin

To quickly and effectively remove adhesive from epoxy resin, you can follow these steps:

• Use a hairdryer to gently heat the adhesive and soften it.
• Gently rub the adhesive with a cloth soaked in isopropyl alcohol to dissolve it.
• If the adhesive is stubborn, you can use a plastic scraper to remove it without damaging the resin surface.
• To eliminate any glue residues, you can use a cotton ball soaked in acetone or a specific solvent for resins. By following these steps, you will be able to remove adhesives from epoxy resin quickly and without damaging the surface.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85