**Removing adhesive from glass and ceramics**

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

**Removing adhesive from glass and ceramics**

To remove adhesive from glass and ceramics, specific solvents such as acetone or isopropyl alcohol can be used. These products are capable of dissolving the adhesive without damaging the surface of the glass or ceramic. It is important to test the solvent on a small hidden area to check its compatibility with the material. Alternatively, commercial adhesive removers can also be used, following the product instructions carefully. In all cases, it is advisable to work in a well-ventilated environment and use protective gloves to avoid direct contact with the solvent.

- Dissolving Glass Glue

To effectively dissolve glass glue, you can follow these steps:

1. Soaking: immerse the object in a solution of hot water and vinegar to soften the glue.
2. Scraping: use a spatula or scraper to gently remove the softened glue.
3. Cleaning: after scraping off most of the glue, clean the surface with a mild detergent to remove any residues. It is important to pay attention and work carefully to avoid damaging the glass during the glue removal process.

Removing resin from ceramics

Removing resin from ceramics can be done with a few simple steps. Here's what you can do:

1. Start by gently scraping the surface of the ceramics with a spatula or scraper to remove the outer layer of resin.
2. Next, use a specific resin solvent or a degreasing detergent to dissolve the remaining resin residue on the ceramic.
3. Apply the solvent to the affected surface and let it sit for a few minutes, then scrub with a clean cloth or sponge.
4. Finally, thoroughly rinse with warm water and dry the ceramics well. By following these steps carefully, you can effectively remove the resin from ceramics without damaging them.

How to remove adhesive from glass

To remove adhesive from glass, you can follow these steps:

• Dampen a cloth with hot water and glass cleaner.
• Apply the cloth to the area with the adhesive and let it sit for a few minutes to soften the adhesive.
• Use a plastic spatula or a blade to gently remove the adhesive.
• If necessary, repeat the process until the adhesive is completely removed.
• Clean the glass with a glass cleaner to eliminate any residue. Avoid using metal scrapers or abrasive substances that could damage the glass. If the adhesive is particularly stubborn, you may consider using specific adhesive solvents.

Solvent for Glue on Ceramics

The most effective solvent for removing glue from ceramic surfaces is acetone. This solvent is capable of dissolving the glue without damaging the underlying material. Before using it, make sure to ventilate the area well and wear protective gloves. Gently apply acetone to the affected area with a clean cloth or cotton ball. Let it sit for a few minutes to soften the glue, then rub gently to remove it completely. After completing the process, be sure to thoroughly clean the surface with water and soap to eliminate any solvent residues.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85