Dissolving Plastic Adhesives Techniques

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Dissolving Plastic Adhesives Techniques

To dissolve plastic adhesives, specific solvents such as acetone or trichloroethylene can be used. However, it is essential to pay attention and carefully follow the instructions to avoid damaging the plastic or health risks. Alternatively, mechanical methods can be adopted, such as using scrapers or hard brushes, or thermal methods, by applying controlled heat with a hairdryer or a heat gun. It is advisable to always test the chosen method on a small hidden area to verify effectiveness and prevent irreparable damage to the plastic surface.

Techniques for dissolving plastic adhesives

Plastic adhesives can be dissolved using different techniques, including:

• Chemical solvents: some solvents like acetone or trichloroethylene can dissolve plastic adhesives. It is important to test the solvent on a small hidden area to check compatibility with the material.
• Heat: heat can soften plastic adhesives, making removal easier. An hairdryer or a low-temperature heat gun can be used.
• File or scraper: for stubborn adhesives, a file or a scraper can be used for manual removal, taking care not to damage the underlying surface. It is crucial to follow the manufacturer's instructions and take necessary safety measures when using solvents or heat.

Guide to dissolve plastic resins

To effectively and safely dissolve plastic resins, it is important to carefully follow some steps. Here is a practical guide:

1. Wear gloves and protective goggles for personal safety.
2. Use a specific solvent for plastic resins such as acetone or trichloroethylene.
3. Apply the solvent on the resin with a brush or a cloth, being careful not to let it drip.
4. Let the solvent act on the resin for a few minutes to soften it.
5. Use a spatula or a scraper to gently remove the softened resin.
6. Repeat the solvent application and removal process as needed.
7. Finally, clean the treated area thoroughly with water and soap. By following these steps, it will be possible to successfully dissolve plastic resins in a safe and efficient manner.

Procedure for dissolving resin adhesives

To dissolve resin adhesives, it is necessary to follow a specific procedure to achieve effective and safe results. Here are the steps to follow:

1. Identify the type of resin in the adhesive to be dissolved.
2. Use a specific solvent compatible with the resin in the adhesive (e.g. acetone for acrylic resins).
3. Apply the solvent to the adhesive surface and let it sit for a few minutes.
4. Use a scraper or cloth to gently remove the softened adhesive.
5. Repeat the solvent application and removal until the adhesive is completely dissolved.
6. Thoroughly clean the treated surface with a neutral detergent to remove any solvent residues. By carefully following this procedure, it is possible to dissolve resin adhesives effectively without damaging the underlying surfaces.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85