Penetrating release spray

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Penetrating release spray

The penetrating release spray is a product formulated to facilitate the removal of molds and templates from complex surfaces. This type of spray is designed to penetrate into the tightest corners and most intricate surfaces, allowing for easy and damage-free removal. Thanks to its specific formulation, the penetrating release spray significantly reduces the risk of damaging the material during extraction. It is particularly useful in resin casting, silicone molding, or similar applications. The penetrating effect enhances the effectiveness of the release agent, ensuring a clean separation between the finished product and the mold material.

Release agent for epoxy resin - 1

The release agent for epoxy resin is a product used to facilitate the removal of epoxy resin artifacts from molds and work surfaces. This type of spray creates a protective layer between the resin and the support, allowing easy separation without damaging the artifact. It is particularly useful in the DIY and hobby sector, where resin processing is widespread. Before using the release agent spray, it is important to carefully read the instructions to ensure correct application and obtain optimal results. It is advisable to test the product on a small area before using it on a larger scale.

How to Use Silicone Molds - Part 2

Silicone molds are useful tools for creating objects in epoxy resin, plaster, or other materials. To use them effectively, follow these steps:

1. Prepare the silicone: make sure the mold is clean and free from dust or residues. If necessary, apply a release agent to facilitate the extraction of the artifact.
2. Pour the material: prepare the resin or plaster following the manufacturer's instructions. Gently pour the mixture into the mold, being careful not to create air bubbles.
3. Cure the material: let the material dry or cure in the silicone for the necessary time, respecting the recommended drying times.
4. Remove the artifact: once the material is fully cured, carefully remove the object from the silicone mold. By following these simple steps, you can easily create unique and detailed objects with silicone molds.

Transparent Resin Pigments - 3

Transparent resin pigments are colorants used to dye epoxy or polyurethane resins while maintaining the material's transparency. These pigments are formulated to ensure a homogeneous mixing and even distribution within the resin, allowing for bright and vibrant colorations. They are particularly appreciated in the DIY and crafting sector for creating jewelry, artistic objects, and colored transparent coatings. Transparent resin pigments are available in different shades and can be blended together to create custom shades and unique chromatic effects.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85