Release agent spray for fresh epoxy adhesives

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent spray for fresh epoxy adhesives

An excellent solution for easily separating fresh epoxy adhesives is the use of a specific release agent spray. These products are formulated to prevent adhesion and facilitate the removal of not fully cured epoxy resins. The release agent spray for fresh epoxy adhesives works by creating a protective layer between the surface and the resin, allowing the adhesive to be easily removed without damaging the underlying materials. Before application, make sure to carefully read the product's instructions for best results and to ensure safety during use.

Epoxy Resin Release Spray

The epoxy resin release spray is a product specially formulated to facilitate the removal of epoxy resins from molds, tools, and work surfaces. This type of spray creates a protective layer between the resin and the support, allowing for easy separation without damaging either the resin or the underlying material. It is particularly useful in the DIY and crafting sector to ensure clean and precise work. Before application, it is advisable to carefully read the manufacturer's instructions and check compatibility with the type of epoxy resin used.

How to Remove Epoxy Resin

To effectively remove epoxy resin, you can follow these steps:

• Wear protective gloves and have a specific solvent for epoxy resins on hand.
• Apply the solvent to the hardened resin and let it sit for a few minutes to soften it.
• Use a scraper or spatula to gently remove the softened resin from the surface.
• If necessary, repeat the solvent application and scraping process until complete removal.
• Finally, thoroughly wash the treated area with water and soap. It is important to pay attention and follow the manufacturer's instructions for the solvent to ensure safe and effective removal of epoxy resin.

Silicone Resin Mould Tutorial

Silicone and resin mould tutorials are essential for those approaching the world of DIY projects. To create quality moulds, follow these steps:

1. Prepare the model: clean and level it carefully.
2. Mix the resin according to the manufacturer's instructions and pour it into the container.
3. Remove air bubbles using a torch or in a vacuum.
4. Gently pour the silicone over the model.
5. Let it cure for the necessary time.
6. Remove the model and your mould will be ready to use. With these simple steps, you can create perfect moulds for your resin creations.

Clear 2-component epoxy resin

The 2-component clear epoxy resin is a versatile and durable material, widely used in various industries. This type of resin is composed of two elements which, once mixed together, create a hardened and transparent solution. Thanks to its transparency and ability to adhere to a wide range of surfaces, the 2-component epoxy resin is ideal for creating protective coatings, producing glossy finishes on artistic or DIY surfaces, and for various repairs. It is important to carefully follow the mixing and application instructions to achieve optimal and long-lasting results.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85