Mold Release Spray for Resin Processing

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Mold Release Spray for Resin Processing

An effective mold release spray for resin processing is essential to facilitate the removal of artifacts without damaging them. This product forms a thin layer between the mold and the resin, preventing unwanted adhesions and simplifying the extraction process. Make sure to evenly apply the spray on the clean and dry mold before pouring the resin. After the completion of the curing process, you will be able to easily remove the artifact without risking surface damage. Choosing a good mold release spray is crucial to achieve optimal results in resin processing.

Epoxy resin release spray

The epoxy resin release spray is an essential product in the DIY and crafting sector. This type of spray creates a protective barrier between the resin and the surface, making it easier to remove the artifact once the resin has solidified. By applying the release spray before pouring the epoxy resin, you prevent it from permanently adhering to the surface. This product is particularly useful for creating jewelry, decorations, and resin coatings. Be sure to carefully follow the instructions for correct and safe use.

How to Use Epoxy Release Spray

To use an epoxy release spray, follow these simple steps:

1. Make sure the surface where the resin will be applied is clean and dry.
2. Shake the epoxy release spray well to ensure even distribution.
3. Spray the release agent on the surface evenly, maintaining the recommended distance from the manufacturer.
4. Allow the spray to dry for the time indicated in the instructions.
5. Then, apply the epoxy on the surface treated with the release spray.
6. Once the resin application is complete, allow it to dry and cure according to the product's instructions. By following these steps, you can ensure proper adhesion of the epoxy and facilitate its removal from the treated surface.

DIY Epoxy Resin Release Spray

The DIY epoxy resin release spray is a useful product to prevent resin from sticking to surfaces during processing. This type of spray creates a barrier between the resin and the support, making it easier to remove the material once it has hardened. Before application, it is important to ensure that the surface is clean and dry. It is recommended to shake the can well and spray the product evenly on the desired surface. After the resin has hardened, it can be easily removed, avoiding damage to the underlying support. The use of resin release spray is particularly recommended in DIY projects involving the processing of epoxy or polyurethane resins.

Release agent for epoxy and silicone resin

The release agent for epoxy and silicone resin is a product used to facilitate the removal of artifacts from work surfaces without damaging them. Thanks to its specific formulation, it creates a protective film that prevents adhesion and facilitates the detachment of the hardened material. This spray is particularly useful in hobby and industrial applications, where precision and attention to detail are essential. Applied before the processing stage, it ensures easier detachment of the artifact from the work surface, reducing the risk of damage and simplifying finishing operations.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85