Adhesive tape release spray

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Adhesive tape release spray

An excellent adhesive tape release spray is a product specially formulated to facilitate the removal of adhesive tapes without damaging the underlying surfaces. This type of spray is particularly useful in various situations, such as in the DIY, industrial, and crafting sectors. Thanks to its formulation based on silicones or resins*, the release agent acts quickly and effectively, reducing the effort required to remove adhesive tapes. Simply spray the product on the surface of interest, let it sit for a few moments, and then easily remove the adhesive tape without leaving any residues or damaging the underlying support.

Epoxy resin release spray

The best epoxy resin release spray is a product specially formulated to facilitate the removal of hardened resin from molds and work surfaces. This type of spray creates a protective layer between the resin and the substrate, allowing for easy release without damaging the artifact. It is recommended for DIY epoxy resin projects and crafts that require a flawless finish and precise details. Make sure to carefully follow the instructions for use and apply the product in well-ventilated environments to ensure optimal results and safety during use.

How to Use Mold Release Spray for Epoxy Resin

Mold release spray for epoxy resin is a useful product to prevent resin from adhering to undesired surfaces during the processing. To use it correctly, follow these steps:

1. Make sure the surface is clean and dry.
2. Shake the mold release spray can well.
3. Spray the release agent evenly onto the intended surface, maintaining the recommended distance from the manufacturer.
4. Allow it to dry for the specified time.
5. Proceed with the resin processing.
6. After use, thoroughly clean the tools to prevent product buildup. By carefully following these instructions, you can make the most of the epoxy resin mold release properties.

Best mold release spray for silicone molds

Mold release sprays for silicone molds are essential to ensure easy removal of artifacts without damaging the material. Among the top products on the market, one stands out, based on special silicones that ensure optimal protection of the material during the extraction process. These sprays are ideal for use on silicone molds used in various sectors such as crafts, pastry, and manufacturing industries. Thanks to their specific formulation, they guarantee superior slipperiness and greater durability of the molds, helping to preserve their quality over time.

Where to buy pigment release spray

The pigment release spray can be purchased at specialized stores in art supplies, well-stocked hardware stores, or online on websites dedicated to the sale of products for DIY and art. This type of spray is particularly useful for protecting surfaces from paint stains or pigments during painting or decorating works. Before purchasing, it is advisable to check the compatibility of the product with the type of material on which you intend to use it, such as wood, metal, or plastic, to achieve the best results.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85