Release agent spray for sensitive surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Release agent spray for sensitive surfaces

The release agent spray for sensitive surfaces is a product formulated to prevent damage during the removal of molds, rubber molds, resins, and silicones from delicate surfaces. This type of spray creates a protective layer between the surface and the material to be removed, facilitating detachment without compromising the integrity of the underlying surface. It is particularly useful in both hobbyist and professional settings, where precision and care of the surfaces are paramount. Make sure to carefully follow the instructions for correct and safe use of the release agent spray for sensitive surfaces.

- Mold release spray for sensitive silicone molds

Mold release sprays for sensitive silicone molds are specially formulated to ensure easy removal of creations without damaging the delicate material. These products create a thin layer between the mold material and the resin or other material poured into them, facilitating release without compromising details. It is important to choose a mold release spray compatible with sensitive silicones to avoid adhesion issues or unwanted reactions. Before use, make sure to carefully follow the instructions and test the product on a small area to verify compatibility with the silicone in use.

**How to Use Mold Release Agent for Epoxy Resin**

To use the mold release agent for epoxy resin, follow these steps:

1. Prepare the working area: make sure the surface is clean, dry, and free of dust.
2. Apply the mold release agent: spray or brush the mold release agent onto the surface evenly.
3. Wait for drying time: allow the mold release agent to dry completely according to the manufacturer's instructions.
4. Pour the epoxy resin: once the mold release agent is dry, pour the epoxy resin onto the prepared surface.
5. Let it cure: follow the curing times for the epoxy resin as indicated by the manufacturer.
6. Remove the piece: once the resin is fully cured, you can easily remove the piece, thanks to the effect of the mold release agent. By following these instructions, you will be able to successfully use the mold release agent for epoxy resin.

Epoxy Resin Mold Release for DIY Projects

The epoxy resin mold release for DIY projects is an essential product to facilitate the removal of resin creations from molds. It is a solution that, once applied to the mold, creates a protective layer that prevents the resin from sticking. This allows for easy extraction of the finished object without damaging it. It is important to carefully follow the instructions for using the mold release, to ensure proper application and achieve optimal results. With the epoxy resin mold release for DIY projects, even beginners in the world of DIY can create beautiful resin pieces with ease.

Mold Release Agent for Artisan Silicone Molds

A mold release agent for artisan silicone molds is an essential product to facilitate the removal of creations from molds without damaging them. This type of release agent is ideal for use with DIY molds made of silicone, ensuring easy extraction of artifacts without compromising their integrity. By applying the release agent evenly on the mold surface, the risk of material sticking to the silicone is significantly reduced, simplifying the processing. Make sure to carefully follow the instructions for using the release agent to achieve the best results and preserve the quality of your artisan silicone artifacts.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85