Removing stickers without leaving stains

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing stickers without leaving stains

To remove stickers without leaving stains, you can follow these simple steps:

• Dampen a cloth with hot water and gently dab the sticker to soften it.
• Use a hairdryer to gently heat the sticker and make it easier to peel off.
• Apply olive oil or coconut oil on the sticker and let it sit for a few minutes to dissolve the adhesive.
• Use a plastic scraper or a plastic card to gently lift the sticker without scratching the surface.
• Clean any residue with a mild detergent and dry thoroughly. By following these tips, you can remove stickers without leaving unsightly stains on the surface.

- Removing stickers without leaving stains

To remove stickers without leaving stains, you can follow some simple steps. First of all, it is recommended to slightly heat the sticker with a hairdryer to soften it. Then, you can use olive or coconut oil to dissolve the excess adhesive. After that, you can gently rub with a microfiber cloth to completely remove the sticker. Alternatively, specific products such as isopropyl alcohol or acetone can be used, taking care to test them first on a small hidden area to check compatibility with the underlying material.

**Label removal without residues**

To remove labels without residues, it is advisable to use a gentle solvent or a specific product for label removal. Here are some steps to follow for effective cleaning without leaving residues:

1. Soaking: Allow the solvent or product to act on the label surface for a few minutes to soften it.
2. Removal: Using a spatula or a soft cloth, slowly peel off the label, being careful not to tear it.
3. Cleaning: After removing the label, clean any residues with a clean cloth soaked in solvent.
4. Drying: Finally, ensure that the surface is completely dry to prevent the formation of new residues. By following these simple steps, you can effectively remove labels without leaving unwanted residues.

Removing glue without leaving marks

To remove glue without leaving marks, you can follow these steps:

1. Dampen a cloth with warm water and mild detergent.
2. Gently dab the area with the glue to soften it.
3. Use a scraper or spatula to remove the excess glue.
4. Repeat the process until the glue is completely removed.
5. Thoroughly dry the area with a clean cloth.
6. If necessary, use a specific solvent for the type of glue present, following the manufacturer's instructions. Remember to always test on a small hidden area to ensure that the method does not damage the surface.

Get rid of stickers without leaving traces

To remove stickers without leaving traces, you can follow some simple steps:

1. Heat the sticker with a hairdryer to soften the adhesive.
2. Gently lift one of the corners of the sticker with a spatula or a rigid card.
3. Apply olive or coconut oil to completely dissolve the adhesive.
4. Clean any residue with a mild detergent and a soft cloth.
5. Finally, wipe the surface with a cloth soaked in isopropyl alcohol to eliminate any remaining traces. By carefully following these steps, you can effectively remove stickers without leaving marks on the surface.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85