Removing labels from industrial machinery

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing labels from industrial machinery

To remove labels from industrial machinery, it is advisable to follow these steps:

1. Soak the label with hot water or a specific product for adhesive removal.
2. Use a scraper or a spatula to gently peel off the label.
3. Clean any glue residues with a mild solvent such as isopropyl alcohol.
4. Wipe with a clean cloth to remove any traces and thoroughly dry the surface. It is important to pay attention not to damage the surface of the machinery during the label removal process.

- Removing labels from industrial machinery

To remove labels from industrial machinery, follow these steps:

1. Soak the label with hot water or a specific product.
2. Lift a corner of the label with a spatula or a stiff card.
3. Slowly peel off the label with firm movements.
4. Remove any adhesive residues with coconut oil or alcohol.
5. Thoroughly clean the surface with a mild detergent.
6. Dry well to prevent rust formation.
7. If necessary, apply a new protective coating on the clean surface. Always remember to be careful not to damage the underlying surface during the removal process.

How to Remove Machinery Stickers

To remove stickers from machinery, it is advisable to follow these steps:

1. Heat the sticker with a hairdryer to soften it.
2. Use a plastic scraper or spatula to gently peel off the sticker.
3. Apply a specific adhesive or epoxy resin solvent** on the surface and let it sit for a few minutes.
4. Remove the sticker with a microfiber cloth, being careful not to scratch the surface.
5. If necessary, repeat the process until the sticker is completely removed.
6. Clean the surface with water and soap to remove any solvent residues. By following these steps, it will be possible to effectively remove stickers from machinery without damaging the surface.

Removing stickers from industrial equipment

To remove stickers from industrial equipment, it is recommended to follow these steps:

1. Soaking: Use hot water and soap to soften the sticker.
2. Scraping: Use a spatula or scraper to gently peel off the sticker.
3. Solvent: Apply a mild solvent such as isopropyl alcohol to remove adhesive residue.
4. Cleaning: After removing the sticker, clean the equipment with a specific detergent to ensure a clean surface. It is important to test the solvent on a small hidden area to check compatibility with the equipment material and wear necessary protective gear during the operation.

Cleaning glue residues from machinery

To clean glue residues from machinery, it is advisable to follow these steps:

1. Use a specific solvent for the type of glue used.
2. Apply the solvent to the affected surface and let it sit for a few minutes.
3. Gently remove the glue residues with a scraper or a soft cloth.
4. Repeat the process if necessary until complete removal.
5. Thoroughly clean the surface with a degreasing detergent to remove any solvent residues. It is important to test the solvent on a small hidden area of the machinery to check the compatibility with the material and prevent damage.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85