Removing labels from fiberglass

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing labels from fiberglass

To remove labels from a fiberglass artifact, you can follow these steps:

1. Dampen the label with warm water to soften it.
2. Use a plastic scraper or a spatula to gently peel off the label.
3. Apply a mild solvent such as denatured alcohol or acetone to the remaining adhesive part.
4. Let it sit for a few minutes to dissolve the adhesive.
5. Clean the area with a clean cloth to remove any glue and solvent residue.
6. If necessary, repeat the process until the label is completely removed.
7. Finally, wash the surface with water and soap to eliminate any remaining traces.

- Removing labels from epoxy resin

To remove labels from objects made of epoxy resin, you can follow some effective steps:

• Dampen a cloth with warm water and mild detergent.
• Apply the cloth to the label surface and let it sit for a few minutes to soften the adhesive.
• Gently peel off the label using a scraper or your nails.
• If adhesive residues remain on the resin, you can use vegetable oil or isopropyl alcohol to remove them.
• Finally, clean the surface with a clean, dry cloth. This method helps prevent damage to the resin during label removal.

How to Remove Stickers from Epoxy Resin

To remove stickers from epoxy resin, you can follow these steps:

• Start by gently heating the sticker with a hairdryer to soften it and make it easier to peel off.
• Use a spatula or a plastic card to gently lift the sticker from the surface of the resin.
• If there are adhesive residues left, you can try removing them with isopropyl alcohol or acetone, being careful not to damage the resin.
• After completely removing the sticker, clean the surface with water and mild soap to eliminate any remaining traces. By carefully following these steps, you can effectively remove stickers from epoxy resin without damaging the underlying material.

Removing stickers from resin prints

To remove stickers from resin prints, you can follow these steps:

1. Soften the stickers: use a hairdryer to gently heat the adhesives and make them easier to remove.
2. Lift the stickers: with the help of a spatula or similar tool, slowly peel off the stickers from the surface of the resin print.
3. Clean residue: any glue residue can be removed with a mild detergent or isopropyl alcohol.
4. Wash the surface: finally, clean the surface with water and soap to eliminate any remaining traces. By following these steps carefully, it will be possible to remove the stickers without damaging the underlying resin print.

Cleaning fiberglass from labels

To clean fiberglass from labels, it is advisable to follow these steps:

1. Soaking: immerse the affected area in hot water to soften the adhesive.
2. Scraping: use a spatula or sandpaper to gently remove the label.
3. Cleaning: apply a degreasing detergent on the fiberglass and scrub with a clean cloth.
4. Rinsing: rinse thoroughly with water to remove detergent residues.
5. Drying: dry thoroughly with a dry cloth to prevent streaking. By following these steps, you can effectively clean fiberglass from labels without damaging the surface.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85