Isolating electrical contact points

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Isolating electrical contact points

Isolating electrical contact points is essential to ensure safety and prevent short circuits or electric shocks. For this process, it is advisable to carefully follow these steps:

• Verify that the electrical system is switched off.
• Remove any dirt or grease residues from the contacts.
• Apply an insulating coating such as epoxy resin or silicone on the contact points.
• Ensure that the insulating material is compatible with temperatures and environmental conditions.
• Verify the correct application and effectiveness of the insulation before reactivating the electrical system. By following these procedures, adequate protection and isolation of electrical contact points can be ensured.

How to Isolate Electrical Contact Points

To insulate electrical contact points, it is possible to use epoxy resins or silicones compliant with electrical insulation regulations. Follow these steps for an effective isolation of the contact points:

1. Thoroughly clean the surface to remove dirt and grease.
2. Apply the epoxy resin or silicone evenly on the contact points.
3. Ensure that the insulating material completely covers the areas of interest.
4. Allow the resin or silicone to dry or cure completely, following the manufacturer's instructions.
5. Verify the effectiveness of the insulation before reactivating the electrical circuit. By following these guidelines, you can safely isolate the electrical contact points.

Materials for insulating electrical contact points

To insulate electrical contact points, it is possible to use materials such as epoxy resins or dielectric silicones. These materials are designed to withstand high temperatures, humidity, and mechanical stresses, ensuring effective protection against short circuits and failures. Epoxy resins offer excellent adhesion and protection against atmospheric agents, while dielectric silicones are flexible and waterproof. Choosing the most suitable material depends on the specific requirements of the application and the type of contacts to be insulated. It is advisable to consult an expert or a professional in the field to identify the best solution for your case.

**Electrical Contact Insulation Techniques**

Insulation techniques for electrical contact points are essential to ensure safety and prevent short circuits and failures. Some common methods include the use of epoxy resins or insulating silicones to coat the contact points, creating a protective layer that prevents the passage of electrical current. These materials are known for their resistance to high temperatures and corrosion, ensuring effective long-term protection. Additionally, DIY can be an option, provided that the instructions are followed correctly and appropriate safety equipment is used.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85