Repair cracked garden hose

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Repair cracked garden hose

To repair a cracked garden hose, you can use a water and weather-resistant silicone repair tape. Before applying the tape, make sure the damaged area is clean and dry. Wrap the tape tightly around the hose, slightly overlapping the edges to ensure an effective repair. Be sure to seal well both above and below the crack. Once the repair is complete, allow the tape to dry for the time recommended by the manufacturer. This method is quick, cost-effective, and efficient for repairing cracked garden hoses in a lasting way.

EPOXY RESIN FOR REPAIRING CRACKED GARDEN HOSE

Epoxy resin is an excellent solution for repairing a cracked garden hose. This durable and versatile material effectively seals cracks, ensuring a long-lasting repair. To use it correctly, follow these steps:

1. Thoroughly clean the damaged area by removing dirt and residues.
2. Measure and mix the epoxy resin according to the manufacturer's instructions.
3. Apply the resin to the crack and ensure it is evenly distributed.
4. Let it dry completely following the recommended curing times.
5. Once dry, inspect the repair and check for any leaks. Epoxy resin is an effective and long-lasting solution for quickly and reliably repairing cracked garden hoses.

Repairing a Garden Hose

To repair a damaged garden hose, you can follow some practical steps:

1. Identify the exact point of the damaged hose.
2. Cut out the damaged part using a utility knife or a pair of scissors.
3. Use a brass or plastic connector to join the two hose pieces.
4. Ensure to securely seal the connector with Teflon tape or suitable clamps.
5. Check for any water leaks and make sure the repaired hose is securely fastened.
6. Lastly, test the repaired hose by slowly turning on the water and checking for any leaks. By following these steps, it is possible to effectively repair a damaged garden hose.

How to Seal an Outdoor Water Pipe

To seal an outdoor water pipe, it is advisable to use epoxy resins or specific silicones for hydraulic pipes. Here are some steps to follow:

1. Thoroughly clean the area to be sealed to remove dirt and residues.
2. Ensure that the pipe is completely dry before applying the sealant.
3. Use an epoxy resin or a suitable silicone for hydraulic pipes.
4. Apply the sealant along the crack or joint to be sealed evenly.
5. Allow it to dry completely following the manufacturer's instructions.
6. Check for any water leaks before reusing the pipe. By following these steps, it will be possible to effectively seal an outdoor water pipe.

Repairing irrigation pipe leak

To repair a leak in an irrigation pipe, you can follow some simple and effective steps:

• Locate the leak: inspect the pipe to precisely identify the point where the water leak is occurring.
• Cut the pipe: once the leak is located, cut the pipe exactly where the issue is.
• Use a fitting or a repair clamp: apply a fitting or a repair clamp on the cut pipe to securely seal the leak.
• Test the repair: ensure that the repair has been done correctly by turning on the irrigation system and checking for any remaining leaks. By following these steps, you can easily fix a leak in an irrigation pipe.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85