Repairing a broken PVC pipe

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Repairing a broken PVC pipe

To repair a broken PVC pipe, you can follow these steps:

1. Locate the leak: Identify the exact point where the pipe has broken.
2. Empty the pipe: Ensure that the pipe is completely drained of water or other fluids.
3. Clean and dry: Thoroughly clean the damaged area and ensure it is completely dry.
4. Apply a PVC resin: Use a specific PVC resin and follow the manufacturer's instructions to apply it to the damaged area.
5. Let it dry: Allow the resin to dry completely for the recommended time.
6. Check the repair: Verify that the repair has been done correctly and that there are no leaks. By following these steps, you can effectively repair a broken PVC pipe.

How to Seal a PVC Pipe

To seal a PVC pipe, you can use a two-component epoxy resin or a silicone that is resistant to water and high temperatures. Here are the steps to follow:

1. Thoroughly clean the outer surface of the pipe and the connecting element.
2. Mix the epoxy resin according to the manufacturer's instructions and apply it evenly on the joint.
3. Press the two elements firmly together and ensure that the resin is evenly distributed.
4. Let it dry for the recommended time by the manufacturer.
5. If using silicone, apply it along the joint and level it with a spatula.
6. Wait for the necessary drying time. By following these steps, you can effectively seal a PVC pipe in a resistant and durable manner.

Repairing a plastic pipe crack

To repair a crack in a plastic pipe, you can follow these steps:

1. Isolation: First and foremost, make sure the pipe is empty and dry.
2. Cleaning: Thoroughly clean the damaged area with a mild detergent to remove dirt and grease.
3. Preparation: Use fine sandpaper to lightly sand the edges of the crack to ensure better adhesion of the epoxy resin or silicone.
4. Application: Apply an epoxy resin or water-resistant silicone on the crack, making sure to fully cover the damaged area.
5. Drying: Follow the manufacturer's instructions for the necessary drying time.
6. Testing: Verify that the repair is effective and that there are no water leaks. Always remember to follow the specific instructions of the product used for a proper and long-lasting repair of the plastic pipe.

Quick PVC pipe repair

Quick repair of PVC pipe is an operation that requires few tools and can be easily carried out even by those with no particular experience in the plumbing sector. Here are the steps to follow:

1. Identify the damaged area of the pipe.
2. Clean and dry the surface around the damage thoroughly.
3. Cut a strip of fiberglass resin adhesive tape of the appropriate size and wrap it around the pipe at the damaged area.
4. Ensure that the tape adheres firmly to the pipe.
5. Wait for the curing time indicated on the tape packaging.
6. Verify that the repair has been carried out correctly. By following these steps, the quick repair of the PVC pipe will be effective and durable over time.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85