Sealing rubber tubes

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Sealing rubber tubes

To effectively seal rubber tubes, it is recommended to use epoxy resins or specific silicones for this purpose. Epoxy resins offer strong adhesion and water resistance, while silicones are flexible and waterproof. Before applying the sealant, make sure the surface of the tube is clean and dry. Then, apply the product along the sealing area and let it dry completely following the manufacturer's instructions. This process will ensure an efficient and long-lasting seal, protecting the rubber tube from any leaks or damage.

Epoxy resin for sealing rubber tubes

Epoxy resin is an effective solution for safely and durably sealing rubber tubes. This polymeric material, once cured, creates a coating resistant to water, weathering, and mechanical stress. To seal rubber tubes with epoxy resin, it is important to carefully follow the manufacturer's instructions. Before applying the resin, make sure the surface of the tubes is clean, dry, and free of grease. Subsequently, thoroughly mix the epoxy resin with the hardener and evenly spread the compound on the area to be sealed. Allow it to dry completely following the recommended drying times to ensure an optimal result.

How to Seal Rubber Tubes with Epoxy Resin

To seal rubber tubes with epoxy resin, follow these steps carefully:

1. Thoroughly clean the surface of the tube and make sure it is completely dry.
2. Mix the epoxy resin with the hardener following the recommended proportions by the manufacturer.
3. Apply the resin on the sealing areas using a brush or an applicator.
4. Ensure the resin is evenly distributed and completely covers the cracks or joints.
5. Let the resin dry completely following the recommended curing times.
6. Check that the sealant is well hardened before using the tube again. By carefully following these instructions, you will achieve an effective and durable sealing.

**Guide to Sealing Rubber Tubes with Epoxy Resin**

To seal rubber tubes with epoxy resin, follow these steps:

1. Thoroughly clean the surface of the rubber tube to remove dirt, grease, and dust.
2. Use fine sandpaper to lightly sand the area to be sealed, promoting adhesion of the resin.
3. Mix the epoxy resin following the manufacturer's instructions and apply it to the sealing area.
4. Ensure that the resin completely fills any cracks or crevices in the tube.
5. Allow the resin to dry for the time indicated on the product, ensuring proper curing.
6. Verify that the seal is complete and effective before using the tube again. By carefully following these steps, you can effectively seal rubber tubes with epoxy resin.

Epoxy resin for waterproofing rubber tubes

Epoxy resin is an excellent solution for waterproofing rubber tubes. Once hardened, this material creates a water and chemical-resistant layer, effectively protecting the tubes from corrosion and wear. To apply epoxy resin, it is important to thoroughly clean the surface of the tube and properly mix the product. Subsequently, it is evenly spread on the surface and allowed to cure according to the manufacturer's instructions. This results in a durable and reliable protective barrier that will extend the service life of the rubber tubes.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85