Epoxy Resin Bubbles on Glossy Surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy Resin Bubbles on Glossy Surfaces

Bubbles in epoxy resin poured on glossy surfaces can be caused by various factors. Here are some tips to prevent them:

1. Make sure to thoroughly mix the resin and the hardener to avoid the formation of air bubbles.
2. Use a torch to eliminate larger bubbles on the surface before the resin solidifies.
3. Work in a temperature-controlled environment to reduce condensation, which can lead to bubble formation.
4. Avoid overloading the surface with too much resin at once.
5. Use a degreasing agent to thoroughly clean the glossy surface before pouring to ensure optimal adhesion of the resin. By following these guidelines, it is possible to minimize the risk of bubbles in the resin when pouring on glossy surfaces.

Epoxy Resin Bubbles on Smooth Surfaces

Bubbles on epoxy resin on smooth surfaces can be caused by various factors. Here are some tips to prevent and remove them:

• Make sure to thoroughly mix the epoxy resin and hardener to prevent bubble formation during application.
• Use a gas torch to eliminate larger bubbles that form during mixing.
• Use a vacuum degassing chamber to remove air bubbles from the resin before application.
• Apply a thin layer of resin as a primer and let it dry before pouring the main coat.
• Avoid over-agitating the resin during application to prevent air entrapment.
• If bubbles still form, you can remove them with a gas torch or a needleless syringe to push the air outwards.

Epoxy resin bubbles on glossy surfaces

Bubbles that form when applying epoxy resin on glossy surfaces are a common issue in the DIY sector. Bubbles can be caused by various reasons, such as improper resin mixing, excessive manipulation during application, or the presence of moisture on the surface. To prevent bubble formation, it is advisable to carefully follow the manufacturer's instructions for mixing and applying epoxy resin. Also, make sure the surface is clean, dry, and well-prepared before application. In case of bubble formation, a gas torch can be used to eliminate surface bubbles or the resin can be poured in thin layers to reduce air accumulation.

How to Prevent Bubbles in Epoxy Resin on Glossy Surfaces

To prevent bubbles in epoxy resin on glossy surfaces, follow these helpful tips:

1. Make sure the surface is clean, dry, and free of dust before applying the resin.
2. Thoroughly mix the resin following the manufacturer's instructions to avoid air entrapment.
3. Use a brush or roller to evenly spread the resin on the surface, avoiding sudden movements that could cause bubble formation.
4. Work in a controlled temperature environment without drafts, which could promote bubble formation.
5. If you notice bubbles during application, you can gently remove them with a gas torch or a warm brush. By following these guidelines, you can achieve a bubble-free final result on the glossy surface.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85