How to Achieve a Perfect Flat Resin Finish

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

How to Achieve a Perfect Flat Resin Finish

To achieve a perfect finish with flat resin, it is essential to follow some key steps:

1. Surface Preparation: Ensure that the surface is clean, smooth, and free of dust or grease.
2. Accurate Measurement: Mix the resin and the catalyst accurately following the proportions recommended by the manufacturer.
3. Uniform Application: Spread the resin on the surface in thin and uniform layers, avoiding build-ups or irregularities.
4. Air Bubble Removal: Use a torch or a brush to eliminate air bubbles present in the resin.
5. Let it Dry: Allow the resin to dry in a dust-free and dry environment to ensure a smooth and uniform finish. By carefully following these steps, you will achieve a perfect finish with flat resin.

How to Achieve a Smooth Surface with Epoxy Resin

To achieve a smooth surface with epoxy resin, follow these steps:

1. Prepare the surface: make sure it is clean, dry, and free of dust and grease.
2. Thoroughly mix the resin and the hardener according to the manufacturer's instructions.
3. Pour the resin onto the surface evenly.
4. Use a brush or a spatula to spread the resin evenly.
5. Remove any air bubbles with a gas torch or a hot air gun.
6. Allow the resin to dry and cure for the recommended time.
7. If necessary, gently sand the surface to eliminate any irregularities.
8. Apply an additional layer of resin if you desire an even smoother finish.

Epoxy Resin without Bubbles

Air bubbles can compromise the quality of a job done with epoxy resin. To prevent the formation of bubbles during the mixing and application of epoxy resin, follow these practical tips:

1. Make sure to thoroughly mix the resin and hardener following the manufacturer's instructions.
2. Let the mixture rest for a few minutes before application to allow air bubbles to rise to the surface.
3. Use a brush or a torch to gently eliminate air bubbles on the surface.
4. Avoid over-agitating the resin during application to prevent introducing additional air bubbles.
5. If necessary, use a degassing chamber to remove air bubbles more effectively. By following these precautions, you can achieve a bubble-free final result in your epoxy resin.

**Epoxy Resin Polishing Techniques**

Polishing epoxy resin is a crucial process to achieve a smooth and glossy surface. Here are some effective techniques to follow:

1. Start with coarse sandpaper to remove any irregularities and level the surface.
2. Gradually switch to finer grits to polish until you achieve a uniform surface.
3. Use an orbital or belt sander for faster and more uniform results.
4. Apply constant pressure during polishing to prevent resin deformations.
5. Lastly, polish the surface with an epoxy resin polishing compound to achieve a shiny and professional finish.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85